In case of connecting more than 2 cameras to an IP router
1. Set each
Example) No.1
UDP Streaming port: 8000 (8000~8009)
Upload port: 556
No.2
TCP Streaming port: 558
UDP Streaming port: 8010 (8010~8019)
Upload port: 559
■After completing every setup, Click the Apply button.
-
■Finally, set the Port Forwarding in order for IP router to handle the access requirement about the assigned IP to each
■IP router Port Forwarding setting can be designated at the Application & Gaming ➞ Port Range Forward page.
■As the Example in the figure, designate the TCP and UDP Port to the SCC- C6475(P) camera that is connected to the IP router.
Each port that is set to the IP router should be set to the Port number that is set at the
■After completing the Port Forwarding setting to the
■Completing the above setting, User can access the
-In case of accessing in the Local PC, user can access it by using the private IP (Example: 192.168.1.200) designated to
-IP or DDNS address of the IP router in case of accessing in the External Remote PC. Access using (Example: cfffe42.websamsung.net).
■DDNS address consists of a combination of 6 digits from the back of MAC Address of
When 6 digits from the front of MAC Address of
‘00:00:f0’, attach the lower case ‘c’, when starting from ‘00:16:6c', attach the lower case ‘m’, and when starting from ‘00:68:36’, attach the lower case ‘p’.
Example 1) If the MAC Address of
Example 2) If the MAC Address of
Example 3) If the MAC Address of
3)In case of connecting the camera to the xDSL/Cable internet network
Modem | Modem |
INTERNET
Remote PC
DDNS Server
(Data Center, KOREA)
■If the user connect the camera to the ADSL/Cable modem directly not using the IP router, assign the network setting in the
■In the beginning, in order to access the setup page in camera, use the SCC- C6475(P) Cross Lan Cable first, and connect user PC directly.
RJ-45 Cross Lan Cable will be enclosed with products.
Cross Ethernet Cable
E