2-3 Static (Fixed) IP
1.Select the “Basic Settings” of Setup Wizard.
2.Select “No” in case of using Static (Fixed) IP.
3.Select the “Use Static IP Address:.
4.Network Properties
➀Enter IP Address : IP*
➁Enter Subnet Mask : Subnet Mask*
➂ Enter Gateway IP : Gateway*
5.Select “Use These DNS Servers”
6.Enter Primary DNS and Secondary DNS: DNS*
7.Select “Use Default Address”
8.Press the “Apply” button.
3. Verify the connection status.
Check the connection status as follows.
1.Select “Router Status”.
2.Verify WAN Port information.
Be sure to write down the Subnet Mask number to use the set
4.Port Forwarding (Be sure to read this.)
E