4. ALARM AUTO SET
Setting to execute the Pattern functions or not when Alarm inputs. When Alarming, stays at the Preset location while Dwell Time set as Preset confront to each Alarm and the Alarm connected to the Pattern will execute the Pattern function continuously.
If Alarm is input, Alarm1 input confronts to Preset1
Alarm2 input confronts to Preset2
Alarm3 input confronts to Preset3
Alarm4 input confronts to Preset4
Motion input confronts to Preset5 and operate.
Off in the setting Menu doesn’t execute Pattern, it means 1 ➔ Pattern1, 2 ➔ Pattern2, 3 ➔ Pattern3, Half1 ➔ Pattern1 + Pattern2 serial operation, Half2 ➔ Pattern2 + Pattern3 serial operation, Full ➔ Pattern1 + Pattern2 + Pattern3 serial operation, Scan 1 · 2 · 3 · 4 execution.
5. AUX OUT CONTROL
Set if the set Alarm output keep operating regardless of Alarming or operate only when Alarming. If set Off, Alarm Out will operate only when Alarming (Active "Low"), if set On, always Alarm output operates regardless of Alarm. To test each Alarm output function, able to check to press Test button.
6. Apply
Completing all the setting, press the Apply button and save the modified contents in the Camera.
❖Network
Network
●Streaming Type
-Sets the streaming type.
-Able to select 3 kinds of streaming type
●Multicast Settings
-Sets the Multicast address, Multicast port and TTL.
E