DIRECTION
This sets up the movement direction of the START to END location (PAN location standard)
"RIGHT " :"LEFT " :
ENDLESS
This is a
* * MAIN MENU * *
CAMERA SET...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
SYSTEM INFO...
PATTERN SET 1
SET START POSITION AND ENTER
➜
Press [Enter]
➜
After PATTER
START
position setup,
press
[ENTER].
(AUTO SET) |
| |
AUTO PAN | 1... | |
|
| |
PATTERN |
| 1... |
SCAN | 1... | |
AUTO PLAY | ... | |
RET
PATTERN SET 1
➜
Press [Enter]
E
SPEED
This is a setting function for movement speed setup. It can be set from STEP1 to STEP64.
DWELL TIME
This is a function for setting up the time to stay in the START to END position.
PATTERN
This is a replay function so that the MANUAL functions such as PAN, TILT, ZOOM, and FOCUS are played for 2 minutes.
PATTERN can be set upto 3. Choose 1, 2, or 3 with the left or right key in the "PATTERN SET" and press [ENTER] to get into the PATTERN set up screen. From the moment "PATTERN 1 SET" is gone for 2 minutes, it memorizes the MANUAL movements and after 2 minutes it will return to a higher menu. If you want to finish set up before the
SCAN
SCAN sets the direction of PRESET movement during “SCAN” operation. The number of SCAN is up to 4 and each SCAN is able to allocate 32 PRESETs as a maximum.
❈When the PATTERN is saved/executed, the PAN/TILT is operated with
PROPORTIONAL ON, TURBO OFF.
❈Two minutes PATTERN function is supported only by the ALARM VER 1.100 over. If the
(AUTO SET) |
| |
AUTO PAN | 1... | |
PATTERN | 1... | |
|
| |
SCAN |
| 1... |
AUTO PLAY | ... | |
RET
|
| SCAN MAP 1 |
|
|
| ||
|
|
|
|
| |||
➜ |
| 0*S | 1* | 2 | 3 | 4 |
|
| 5 | 6 | 7 | 8 | 9 |
| |
10 | 11 | 12 | 13 | 14 |
| ||
Press | 15 | 16 | 17 | 18 | 19 |
| |
20 | 21 | 22 | 23 | 24 |
| ||
[Enter] |
| ||||||
25 | 26 | 27 | 28 | 29 |
| ||
| 30 | 31 | î | ï |
|
| |
|
| EXIT |
|
|
| SAVE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you enter the SCAN SET screen, PRESET MAP will be displayed. Move the cursor to the number marked * where PRESET is saved and press [ENTER] and S will appear and a PRESET will be included in SCAN.