Philips PAC132 user manual Connect to headphone, Connect to camcorder, Power on, Volume control

3.2 Connect to headphone

Connect the headphones to the right side of the player for private listening.

p

3.3 Connect to camcorder

2

1

You can connect the player to your camcorder to view video on a bigger screen.

1Connect PAC132 to the power source.

2Connect the camcorder to PAC132 using the audio/video cable. You can adjust the volume and the brightness of the display screen during video playback.

4 Enjoyment

4.1 Power on

1Power on the connected device, such as the primary DVD play- er, camcorder etc.

2Power on PAC132.

3PAC132 will automatically playback the video content.

4Power off all the devices after viewing.

4.2 Volume control

Adjust the volume control on the right side of the player.

4.3 Screen brightness

Use the rotary switch on the right side of the unit to finetune the TFT screen brightness.

5 Troubleshooting

If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked.

WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.

If a fault occurs, first check the points listed, before taking the set for repair. If you are unable to solve a problem by follow- ing these hints, consult your dealer or service centre.

7