Rockford Fosgate FNQ3414, FNQ3514, FNQ4401X One Channel From Source Mid Bass Mids Or Amplifier

INSTALLATION-SPEAKERS

3.Remove the ring. Drill the holes for the screws using a 1/8" drill bit.

4.Route the wire through the mounting hole cut-out.

5.Attach the wires. Observe proper speaker polarity.

6.Place the mounting ring over the speaker.

7.Place the speaker into the hole and screw the speaker into place.

8.Press the speaker grille into the mounting ring.

Mounting Ring

Screw

Grille

Mounting Hole,

Cut-Out

Speaker

Example of speaker installation

Use this when installing Mid Bass or 3-Way

A

B

		Tweeter
	C
One Channel
From Source	Mid Bass	Mids
or Amplifier

7