Icom IC-R3 instruction manual VFO scan watch

Page 31

VFO scan watch

qSelect the desired memory channel to be watched. w Push [V/M] to select VFO mode.

e Push [] for 2 sec. to start full scan, band scan or pro- grammed scan. (p. 19)

r Push [FUNC] + [(MODE) SET] momentarily to enter set mode.

Select a non-band scope screen in advance for color LCD.

tRotate [DIAL] to select “Priority” or “PRIo.”

“PRIo” disappears after 1 sec. and “oFF” and “PR” appears when color LCD is OFF.

yPush [] or rotate the tuning dial while pushing [FUNC] to select priority watch ON or priority watch ON with alert (BELL).

If the pocket beep function is activated, the receiver automati- cally selects the tone squelch function when the priority watch is selected.

Pause Scan

:

10SEC

 

Pause Scan

:

10SEC

 

Pause Scan

: 10SEC

Priority

:

OFF

 

Priority

:

ON

 

Priority

:

BELL

Beep Audio

:

VOLUME

 

Beep Audio

:

VOLUME

 

Beep Audio

: VOLUME

Light

:

AUTO

 

Light

:

AUTO

 

Light

:

AUTO

A.Power OFF :

OFF

 

A.Power OFF :

OFF

 

A.Power OFF :

OFF

Priority watch set

Priority watch is ON. Priority watch with

mode

alert is ON.

PRIORITY WATCH 7

uPush [(MODE) SET] to exit set mode and start the watch.

The receiver checks the memory channel frequency every 5 sec.

The watch resumes according to the selected scan resume con- dition. (p. 22)

If the priority watch with alert is ON, you can be alerted with beeps and a flashing “P.B” or “ë.”

If the direction finding screen is selected, the receiver automati- cally selects the simple screen when the priority watch starts.

FM

 

 

 

M:A18

 

145.765.000

 

TS

 

15.0

FM

PRIO

ALL

 

 

 

 

 

PRIO

3

5

7

9

 

S1

 

RX

 

 

 

RX

 

VOL

 

 

 

 

 

While pausing on the memory channel, “PRIO” flashes.

iPush [V/M] while the display shows the VFO frequency to stop the watch.

27

Image 31 Icom IC-R3 instruction manual VFO scan watch
Contents IR3 +60C +140F You experience a ringing in your ears, reduce the volumeAreas with temperatures below -10C +14F or above Even when the receiver power is OFF, a slight current stillAccessories included with the receiver Qty Supplied AccessoriesTable of Contents Belt clip Accessory AttachmentBattery installation AntennaPanel description Panel DescriptionExternal DC Power Jack DC VFO/MEMORY Switch V/M SkipMode Switch Mode SET Monitor Switch SQL ATTFunction display Audio and video output jack information Skip Scan Indicator pgsBattery Indicators 2ATTENUATOR Indicator pDual LCD Operating band selection Frequency and Channel SettingWhat is VFO? VFO and memory channelsSetting a tuning step Setting a frequencyLock function Push SQL ATT to exit the attenuator setting conditionSelecting a memory channel Attenuator functionU.S.A. version automatically turns itself OFF when When a signal is receivedBasic Operation ReceivingDial to select the squelch level Setting volume levelSetting squelch level While pushing SQL, rotateMonitor function Receive mode selectionRotate Dial until Light appears Setting the backlighting conditionPush Func + Mode SET momentarily to enter set mode Display backlightingProgramming during selection Memory channel contentsMemory Channels GeneralProgramming after selection Transferring memory contents to another memoryPush Func + V/M for 2 sec. to clear Memory bank selection Memory clearExample Clearing memory channel 3 memory bank a Memory names Rotate the tuning dial to select the desired characterFunction p Scan OperationScan types Full Scan pRelease ↔ to start the scan Full/band/programmed scanTo stop the scan, push ↔ again Memory bank scanBand ranges Selecting scan edgesRotate Dial until Pause Scan or Pause appears Skip channel settingSetting the scan pause time Scan resume conditionRotate Dial until Scan Resume or RESUmE appears Setting the scan resume timeProgramming a skip frequency Frequency skip functionFrequency skip function ON/OFF VFO Scan Watch p Priority WatchPriority watch types Memory Scan Watch pRotate Dial to select Priority or PRIo Push Mode SET to exit set mode and start the watchPriority watch operation Memory channel watch and memory scan WatchVFO scan watch Operation Setting subaudible tones for tone squelch OperationSubaudible Tone Operation Tone squelch operationRotate Dial until Tone Freq. or tonE appears Pocket beep operationAvailable subaudible tone frequencies Unit Hz Push SQL to stop the beeps and flashing Tone scanPush ↔ to stop the scan Duplex shift direction Duplex OperationRotate Dial until Duplex or dUP appears Rotate Dial until Offset Freq. or oFFSEt appears Offset frequencyRange, if desired Band ScopeTV channel receiving Skip channel settingTV Operation TV operationPush Func + one or more times to select the TV screen TV frequency AM TV receivingTV frequency AM TV memory channel Push ↔ one or more times to select the band above 30 MHzATV operation Sub carrier adjustmentATV memory channel Direction finding function example Signal sourceSignal levels Direction FindingSet mode items Set modeOther Functions Dial select step Setting dial select stepRelease Func to exit the condition Rotate Dial until Beep Audio or bEEP appears Auto power-off functionRotate Dial until A.Power OFF or AP oFF appears Beep tonesRotate Dial until Monitor or monI appears Power saverMonitor switch action Rotate Dial until Power Save or P Save appearsRotate Dial until Key Lock or LoCk appears Dial speed accelerationLock function effect Rotate Dial until Dial Speedup or SPEEd appearsRotate Dial until Display or dISP appears Display mode selectionColor LCD can be automatically turned on when using Display contrastDisplay background color Display brightnessRotate Dial until Bright appears Cloning function Partial resetTotal reset Push Power for 2 sec. to turn power OFFBattery pack installation Battery ChargingBattery cautions Battery chargingRapid charging with the BC-135 CP-18A/E fuse ReplacementCP-18A/ETurn power OFF Check Regular chargingMemory mode VFO mode Operation Flow ChartAuto power OFF p Confirmation beep p Backlighting p Power save pScan resume time p A. channels TV Frequency TableCcir channels Taiwan channels Australian channelsNew Zealand channels Indonesian channels China channelsItalian channels FOT channels General Specifications and OptionsReceiver Options Operating periods ApproxProblem Possible Cause Solution TroubleshootingQuick Reference Quick Reference Declaration of Conformity Kamihigashi, Hirano-ku, Osaka 547-0002 Japan