Icom IC-R3 instruction manual ATV operation, ATV memory channel, Sub carrier adjustment

Page 40

11 TV OPERATION

■ATV operation

The IC-R3 ATV-type can receive an amateur TV (FM TV) within 900–1300 and 2250–2450.095 MHz. The received video and audio can be output from [A/V OUT] if desired. (p. 5)

qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON, if desired.

• Only the audio part of the TV contents can be received.

wPush [↔] one or more times to select the 1200 or 2400 MHz bands.

ePush [FUNC] + [↕] one or more times to select the ama- teur TV screen.

•“FtV” and frequency appear in the sub LCD.

•The squelch is automatically opened. Push [SQL] to toggle be- tween squelch open and audio mute conditions.

rRotate [DIAL] to set the desired frequency.

WFM

RX

The video display mode can be selected as positive and

negative depending on the received signal. Push [MODE] to toggle the display mode, if desired.

◊ATV memory channel

The receiver has 50 memory channels for storage of often- used ATV (Amateur TV) frequencies.

qSet the desired frequency with [DIAL].

•Push [↔] to select the 1200 or 2400 MHz band.

•Rotate [DIAL] while pushing [FUNC] for dial select step. (p. 39) w Push [V/M] for 1 sec. to indicate memory channels.

•Do not hold [V/M] for more than 2 sec., otherwise the previously selected memory channel will be overwritten.

eRotate [DIAL] to select the desired channel. r Push [V/M] for 1 sec. to program.

• Keep pushing for 2 sec. or more to	WFM
automatically select the next mem-
ory channel, if desired.	RX
ory channel, if desired.

Memory programming after selection, memory transferring

or memory clearing can be used as same manner of regu- lar memory channels. (pgs. 15, 16)

◊Sub carrier adjustment

qPush [FUNC] + [↔] for 2 sec. to enter sub carrier set

mode.

wPush [↔] or rotate the tuning dial

while pushing [FUNC] to adjust

sub carrier for better audio re- RX ceiving.

ePush [↔] to exit sub carrier set mode.

36

Image 40

Contents IR3 You experience a ringing in your ears, reduce the volume Areas with temperatures below -10C +14F or aboveEven when the receiver power is OFF, a slight current still +60C +140FSupplied Accessories Accessories included with the receiver QtyTable of Contents Accessory Attachment Battery installationAntenna Belt clipPanel Description Panel descriptionVFO/MEMORY Switch V/M Skip Mode Switch Mode SETMonitor Switch SQL ATT External DC Power Jack DCFunction display Skip Scan Indicator pgs Battery Indicators2ATTENUATOR Indicator p Audio and video output jack informationDual LCD Frequency and Channel Setting What is VFO?VFO and memory channels Operating band selectionSetting a frequency Setting a tuning stepPush SQL ATT to exit the attenuator setting condition Selecting a memory channelAttenuator function Lock functionWhen a signal is received Basic OperationReceiving U.S.A. version automatically turns itself OFF whenSetting volume level Setting squelch levelWhile pushing SQL, rotate Dial to select the squelch levelReceive mode selection Monitor functionSetting the backlighting condition Push Func + Mode SET momentarily to enter set modeDisplay backlighting Rotate Dial until Light appearsMemory channel contents Memory ChannelsGeneral Programming during selectionTransferring memory contents to another memory Programming after selectionPush Func + V/M for 2 sec. to clear Memory bank selection Memory clearExample Clearing memory channel 3 memory bank a Rotate the tuning dial to select the desired character Memory namesScan Operation Scan typesFull Scan p Function pFull/band/programmed scan Release ↔ to start the scanMemory bank scan To stop the scan, push ↔ againSelecting scan edges Band rangesSkip channel setting Setting the scan pause timeScan resume condition Rotate Dial until Pause Scan or Pause appearsSetting the scan resume time Rotate Dial until Scan Resume or RESUmE appearsProgramming a skip frequency Frequency skip functionFrequency skip function ON/OFF Priority Watch Priority watch typesMemory Scan Watch p VFO Scan Watch pPush Mode SET to exit set mode and start the watch Priority watch operationMemory channel watch and memory scan Watch Rotate Dial to select Priority or PRIoVFO scan watch Setting subaudible tones for tone squelch Operation Subaudible Tone OperationTone squelch operation OperationRotate Dial until Tone Freq. or tonE appears Pocket beep operationAvailable subaudible tone frequencies Unit Hz Push SQL to stop the beeps and ﬂashing Tone scanPush ↔ to stop the scan Duplex shift direction Duplex OperationRotate Dial until Duplex or dUP appears Offset frequency Rotate Dial until Offset Freq. or oFFSEt appearsBand Scope Range, if desiredSkip channel setting TV OperationTV operation TV channel receivingTV frequency AM TV receiving TV frequency AM TV memory channelPush ↔ one or more times to select the band above 30 MHz Push Func + one or more times to select the TV screenATV operation Sub carrier adjustmentATV memory channel Signal source Signal levelsDirection Finding Direction ﬁnding function exampleSet mode items Set modeOther Functions Dial select step Setting dial select stepRelease Func to exit the condition Auto power-off function Rotate Dial until A.Power OFF or AP oFF appearsBeep tones Rotate Dial until Beep Audio or bEEP appearsPower saver Monitor switch actionRotate Dial until Power Save or P Save appears Rotate Dial until Monitor or monI appearsDial speed acceleration Lock function effectRotate Dial until Dial Speedup or SPEEd appears Rotate Dial until Key Lock or LoCk appearsDisplay mode selection Color LCD can be automatically turned on when usingDisplay contrast Rotate Dial until Display or dISP appearsDisplay background color Display brightnessRotate Dial until Bright appears Partial reset Total resetPush Power for 2 sec. to turn power OFF Cloning functionBattery Charging Battery cautionsBattery charging Battery pack installationCP-18A/E fuse ReplacementCP-18A/E Turn power OFF CheckRegular charging Rapid charging with the BC-135Operation Flow Chart Memory mode VFO modeAuto power OFF p Confirmation beep p Backlighting p Power save pScan resume time p A. channels TV Frequency TableCcir channels Taiwan channels Australian channelsNew Zealand channels China channels Indonesian channelsItalian channels FOT channels General Specifications and OptionsReceiver Operating periods Approx OptionsTroubleshooting Problem Possible Cause SolutionQuick Reference Quick Reference Declaration of Conformity Kamihigashi, Hirano-ku, Osaka 547-0002 Japan