RADIO MODE | CD MODE |
Setting the scantime
➮Press the MENU button 8.
➮Keep pressing the fi or % button 7 until “SCAN TIME” appears in the display.
➮Set the required scantime using the @ or # buttons 7.
When you have finished making your changes,
➮press the MENU button 8twice.
Note:
●The set scantime also applies to scanning in CD/MP3 and CD changer mode.
Setting the display
You can choose to continuous display one of the followings:
●Time
●Frequency
➮Keep the 
button 6pressed until the required display appears.
CD mode
You can use this unit to play standard CDs,
Beside playing CDs containing audio data, CDs containing MP3 files can also be played on this device.
Descriptions of the “MP3 mode” can be found after this chapter.
Risk of damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit.
We accept no liability for any damage to the CD drive or CD that may occur as a result of the use of unsuitable CDs.
Switching to CD mode
●If there is no CD inserted in the drive and the unit is playing Radio or CD Changer (AUX) mode,
➮press the 
button 1. The release panel opens.
➮Gently insert CD with the printed side uppermost into the drive until you feel some resistance.
The CD is drawn into the drive automatically.
You must not hinder or assist the drive as it draws in the CD.
➮Gently close the control panel whilst exerting a little pressure until you feel it clicks into place.
CD playback begins.
ENGLISH
13