Alpine Subwoofer On and Off CDE-7859 only, Subwoofer On and Off CDE-7858/ CDE-7856 only

Press the SETUP button for at least 3 seconds.

Subwoofer On and Off (CDE-7859 only)

1

2 Press the g DN or f UP button to select the Sub-w mode.

3 Press the BAND button to select Subwoofer ON or OFF.

4 After setting is completed, press the SETUP button to return to normal mode.

NOTES

∙Initial mode is "Subwoofer ON."

∙Set to "Subwoofer OFF" unless the subwoofer is used.

∙When the subwoofer is turned on, the subwoofer output level can be adjusted. For more details, refer to the Adjusting Volume/Balance/Fader.

Subwoofer On and Off (CDE-7858/ CDE-7856 only)

1 Press and hold the c(Eject) button for at least 3 seconds.

With each press, subwoofer is toggled On or Off.

NOTES

∙Initial mode is "Subwoofer OFF."

∙Set to "Subwoofer OFF" unless the subwoofer is used.

∙When the subwoofer is turned on, the subwoofer output level can be adjusted. For more details, refer to the Adjusting Volume/Bass/Treble/Balance/Fader.

Adjusting Volume/Bass/Treble/

Balance (Between Left and Right)/

Fader (Between Front and Rear)

1 Press the MODE button repeatedly to choose the desired mode.

Each press changes the modes as follows:

(CDE-7859)
	→ VOL			→ BAL			→	FAD
(CDE-7858/CDE-7856)
		→ VOL			→ BAS				→TRE
			FAD		←	BAL			←

NOTES

∙If the 5 or 6 button is not pressed within 5 seconds after selecting the BASS, TREBLE, BALANCE, or FADER mode, the unit automatically returns to the VOLUME mode.

∙When the subwoofer is set to ON, the level of the subwoofer can be adjusted.

2 Press the 5 and 6 buttons until the desired sound is obtained in each mode.

NOTE

The settings of the Bass and Treble will be individually memorized for each source (FM, AM and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.

Turning Loudness On/Off (CDE-7856 only)

Loudness introduces a special low- and high- frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound.

1 Press and hold the LOUD button for at least

2 seconds to activate or deactivate the loudness mode.

The display shows "LOUD" when the loudness mode is activated.

5-EN