Sharp MD-MT866H Volume control, Bass control, To interrupt playback, To stop playback

Page 25

1 Insert the earphones plug firmly into the earphones socket on the remote control unit.

2 Plug the remote control into the socket on the unit.

3 Insert a MiniDisc (page 17).

4 Press the 06 button.

●Playback starts automatically with a playback only MiniDisc or a MiniDisc which is protected against accidental erasure (Auto-play function).

To interrupt playback

Press the 06 button.

●To resume playback, press the 06 button again.

To stop playback

Press the • ■ / :OFF button.

●If the unit is not operated for at least 2 minutes whilst in the stop mode, the power will shut off automatically.

To turn off the power

Press the • ■ / :OFF button whilst in the stop mode.

Volume control

Move the left shuttle switch to VOL+ to increase the volume and the left shuttle switch to VOL– to de- crease the volume.

Volume (0 - 30)

Bass control

Each time the left shuttle switch is pressed toward “BASS” (Remote control: the SOUND button is pressed), the tone will be switched as follows.

BASS 1	Emphasised slightly
BASS 2	Emphasised more
BASS 3	Emphasised fully
BASS OFF	Cancelled

Notes:

●If power failure occurs whilst playing a disc using the AC adaptor, disconnect it from the wall socket. Otherwise, play- back may start automatically when electricity resumes.

●If you connect the AC adaptor without installing the re- chargeable battery, playback may start automatically. Be sure to turn off the power.

●Reduce the volume before starting to play. MiniDiscs, com- pared to ordinary cassette tapes, have very little noise. If the volume is adjusted according to your usual expecta- tions of noise, high volume may damage your hearing.

●The sound escaping from your earphones may annoy people around you.

In particularly crowded places (such as on trains or buses), reduce the volume.

Operation	Playback –
Basic	–

25

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 25

Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsRemote control display panel Remote control unitIndicators NamesBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode Battery How to use the Charge / Operation switchRemoving For use with the AC adaptorPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Using with Using with the AC AdaptorOperation mode SourceRelease Lock Open PressPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB To interrupt recording To update the recorded contents of the MiniDiscTo stop recording About the TOCOperation Helpful tip when attaching a labelRecording BasicBasic PlaybackPlayback Before Playing backTo turn off the power Volume controlBass control To interrupt playbackTo locate the beginning of a track Advanced PlaybackRandom play or repeat play Useful Features Advanced PlaybackTo interrupt fast playback To return to normal playbackAdvanced Recording Press the Mode button whilst the record- ing is paused Useful Features Advanced RecordingLong-play recording monaural recording Start recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCTo create your own track numbers When a recording is paused or whilst recording…Recording tracks as a single track You can create your own track numbers at any pointAbout sampling rate converter About track numbersTo write recorded contents on the MiniDisc Useful Features Recording from a MicrophoneRecording from a Microphone To record from a microphoneRecording from a Microphone Track intervals UsefulDuring a mic manual recording During a mic synchro recordingChecking Displays Useful Features Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonVidual track To display the playing time of an indiTrack number and track name Press the Disp button to display the playFeatures Changing Default SettingsDefault Settings ChangingAuto power save Display backlight on the remote controlBeep sound Auto playAdvanced Titling a MiniDiscMiniDisc Titling aTo erase a character Characters symbolsTo enter a space To add charactersWhat is a MiniDisc for stamping? What is a master MiniDisc?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Press the right shuttle switch toward ENTER/SYNC again Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a timeTo combine tracks To divide a trackPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track AD-CA55X White RedReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery MiniDisc System Limitations Symptom LimitationsError Messages Error MessagesReferences Tr. Protect No SignalTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsWeight DimensionsSignal readout Error correctionSharp Corporation