Sharp MD-MT866H operation manual To move a track

Advanced Features – Editing a Recorded MiniDisc –

46

Editing a Recorded MiniDisc (continued)

		To move a track	5 Press the right shuttle switch toward
			“ENTER/SYNC” again.
	1 Play the track to be moved, and press the
	06 button.
	2 Press the EDIT button repeatedly to select		● The track will be moved, and the unit will be paused
	“MOVE”.		at the beginning of the track.
			When a track has a name before dividing:
			● The two new tracks will have the same name. However,
	3 Press the right shuttle switch toward		in the TOC FULL condition, the second track may not be
			named.
	“ENTER/SYNC”.		Total number of tracks that can be divided:
			● Each disc can hold up to 255 tracks. However, even if
			the number of assigned tracks has not reached 254, it
			might not be possible to make any further divisions of
	● To cancel the operation, press the • ■ / :OFF but-		tracks.
			To combine two non-adjacent tracks:
	ton.
			● First, put the two tracks next to each other in the order
	4 Move the right shuttle switch to 5 or 4		you want using the MOVE function. Then combine them
			using the COMBINE function.
	to select the direction.		When one or both tracks to be combined have a name:
			● The first track name will be used. However, when the
			first track does not have a name, the second track name
			will be used.
			In the following cases, tracks may not be combined:
			● Tracks recorded by different inputs cannot be combined.
			Example:
			- Digital recorded track and analogue recorded track.
			- Long play recorded track and stereo recorded track.
			● Tracks whose recording time is less than 12 seconds.
Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)