Sharp MD-MT866H operation manual Advanced Recording

Page 28

Advanced Recording

Useful Features – Advanced Recording –

28

Playback sound-actuated recording (Synchronised recording)

Recording automatically starts or pauses by detect- ing sound from the stereo system (Synchronised recording).

1 Press the REC button.

2 Begin playback on the stereo system con- nected to this portable MD.

3 Move the right shuttle switch to 5or 4 to adjust the recording level.

4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode. (See page 18,19)

●Select the starting point for your recording and press the PAUSE button.

5 Press the right shuttle switch toward “ENTER/SYNC”.

6 Begin playback on the stereo system. Recording will begin automatically.

To interrupt recording:

●When the stereo system is stopped, the unit will enter the synchro recording pause mode. When playback is resumed, the recording will be resumed.

●If a silence lasts for 3 seconds or more, the recording will be paused (Pause function does not work for approximately 10 seconds after a recording starts).

●When the unit receives sound again, recording automati- cally starts.

●A new track number is created when the recording re- sumes.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 28

Contents MD-MT866H Thank you for purchasing this Sharp productAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitNames of Controls and Indicators Main unitImportant Introduction Names of Controls and Indicators Main unit display panelRemote control unit Remote control display panelIndicators NamesBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode How to use the Charge / Operation switch BatteryRemoving For use with the AC adaptorPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Using with the AC Adaptor Using withOperation mode SourceOpen Press Release LockPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB To update the recorded contents of the MiniDisc To interrupt recordingTo stop recording About the TOCHelpful tip when attaching a label OperationRecording BasicPlayback BasicPlayback Before Playing backVolume control To turn off the powerBass control To interrupt playbackAdvanced Playback To locate the beginning of a trackUseful Features Advanced Playback Random play or repeat playTo interrupt fast playback To return to normal playbackAdvanced Recording Useful Features Advanced Recording Press the Mode button whilst the record- ing is pausedLong-play recording monaural recording Start recordingPress the right shuttle switch toward ENTER/SYNC You can erase a portion of a track and make a new recordingWhen a recording is paused or whilst recording… To create your own track numbersRecording tracks as a single track You can create your own track numbers at any pointAbout track numbers About sampling rate converterUseful Features Recording from a Microphone To write recorded contents on the MiniDiscRecording from a Microphone To record from a microphoneRecording from a Microphone Useful Track intervalsDuring a mic manual recording During a mic synchro recordingUseful Features Checking Displays Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonTo display the playing time of an indi Vidual trackTrack number and track name Press the Disp button to display the playChanging Default Settings FeaturesDefault Settings ChangingDisplay backlight on the remote control Auto power saveBeep sound Auto playTitling a MiniDisc AdvancedMiniDisc Titling aCharacters symbols To erase a characterTo enter a space To add charactersWhat is a master MiniDisc? What is a MiniDisc for stamping?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Advanced Features Press the right shuttle switch toward ENTER/SYNC againEditing a Recorded MiniDisc To erase tracks one at a timeTo divide a track To combine tracksPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track White Red AD-CA55XReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery Symptom Limitations MiniDisc System LimitationsError Messages Error MessagesReferences No Signal Tr. ProtectTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsDimensions WeightSignal readout Error correctionSharp Corporation