Sharp MD-MT866H To display the playing time of an indi, Vidual track, Track number and track name

Page 37

To display the playing time of an indi-

 

Checking the remaining amount of

vidual track

 

battery level

 

 

 

1 Whilst in the stop mode, move the right

The remaining amount of battery level is shown

by the battery indicator (

) during operation.

shuttle switch to 5 or 4 to display the

How to read the battery indicator

track number and track name.

 

 

Track number

When the battery

When the battery

 

Track name

level is high

level is very low

 

● When the battery is completely discharged, the battery

2 Press the DISP button to display the play-

indicator will flash. Recharge the battery or replace the

alkaline battery with a new one.

 

● When the battery has run completely out, “BATT EMPTY

ing time for that track.

(LoBATT)” will appear. Then, the power will be discon-

 

 

nected automatically.

 

 

 

 

 

 

Notes:

 

 

 

 

 

 

 

● If you use the battery which you stopped charging half-

 

 

 

 

Playing time

way, “

 

 

 

 

 

” may appear. It does not mean that the bat-

 

 

 

 

 

 

 

 

 

 

 

 

tery is completely charged.

 

 

 

 

 

● Each time the right shuttle switch to 5 or 4 is

● The battery indicator will not correctly display the remain-

ing capacity for approximately 10 seconds after the power

moved, the playing time of the previous or next

has been turned on.

track will be displayed.

● When the AC adaptor or a separately available car adap-

 

 

 

 

 

tor is used, the battery indicator will not be shown.

 

 

 

 

 

● The number of bars shown in the battery indicator may

 

 

 

 

 

increase or decrease, depending on the operation be-

 

 

 

 

 

ing performed. This is normal.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Useful Features – Checking Displays –

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsRemote control display panel Remote control unitIndicators NamesBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode Battery How to use the Charge / Operation switchRemoving For use with the AC adaptorPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Using with Using with the AC AdaptorOperation mode SourceRelease Lock Open PressPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB To interrupt recording To update the recorded contents of the MiniDiscTo stop recording About the TOCOperation Helpful tip when attaching a labelRecording BasicBasic PlaybackPlayback Before Playing backTo turn off the power Volume controlBass control To interrupt playbackTo locate the beginning of a track Advanced PlaybackRandom play or repeat play Useful Features Advanced PlaybackTo interrupt fast playback To return to normal playbackAdvanced Recording Press the Mode button whilst the record- ing is paused Useful Features Advanced RecordingLong-play recording monaural recording Start recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCTo create your own track numbers When a recording is paused or whilst recording…Recording tracks as a single track You can create your own track numbers at any pointAbout sampling rate converter About track numbersTo write recorded contents on the MiniDisc Useful Features Recording from a MicrophoneRecording from a Microphone To record from a microphoneRecording from a Microphone Track intervals UsefulDuring a mic manual recording During a mic synchro recordingChecking Displays Useful Features Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonVidual track To display the playing time of an indiTrack number and track name Press the Disp button to display the playFeatures Changing Default SettingsDefault Settings ChangingAuto power save Display backlight on the remote controlBeep sound Auto playAdvanced Titling a MiniDiscMiniDisc Titling aTo erase a character Characters symbolsTo enter a space To add charactersWhat is a MiniDisc for stamping? What is a master MiniDisc?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Press the right shuttle switch toward ENTER/SYNC again Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a timeTo combine tracks To divide a trackPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track AD-CA55X White RedReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery MiniDisc System Limitations Symptom LimitationsError Messages Error MessagesReferences Tr. Protect No SignalTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsWeight DimensionsSignal readout Error correctionSharp Corporation
Top Page Image Contents