Sharp MD-MT866H operation manual Troubleshooting

Page 52

References

– Troubleshooting –

52

Troubleshooting

Many potential “problems” can be resolved by the owner without calling a service technician.

If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or service centre.

PROBLEM		CAUSE

The unit does not turn on.		● Is the AC adaptor disconnected?
		● Is the battery exhausted?
		● Is the unit in the hold mode?
		● Has condensation formed inside the unit?
		● Is the unit being influenced by mechanical shock or by static electricity?

No sound is heard from the ear-		● Is the volume set too low?
phones.		● Is the remote control unit or the earphones plugged in?
		● Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music?

When the operation buttons are		● Is the unit in the hold mode?
pressed, the unit does not respond.		● Is the battery exhausted?
		● Is the remote control unit plug or the earphones plug inserted firmly?

Some sounds are skipped.		● Is the battery exhausted?
		● Is the unit being subjected to excessive vibration?

The MiniDisc cannot be ejected.		● Has the track number or character information been updated on the disc yet?
		● Is the unit in the recording or editing mode?

Recording and editing are impos-		● Is the MiniDisc protected against accidental erasure?
sible.		● Is the unit connected properly to the other equipment?
		● Is the AC adaptor unplugged or did a power failure occur whilst recording or editing?
		● Is the unit in the hold mode?
		● Is an optical signal being output from the stereo system?
		Read the operation manual for the stereo system.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 52

Contents MD-MT866H Thank you for purchasing this Sharp productAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitNames of Controls and Indicators Main unitImportant Introduction Names of Controls and Indicators Main unit display panelRemote control unit Remote control display panelIndicators NamesBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode How to use the Charge / Operation switch BatteryRemoving For use with the AC adaptorPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Using with the AC Adaptor Using withOperation mode SourceOpen Press Release LockPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB To update the recorded contents of the MiniDisc To interrupt recordingTo stop recording About the TOCHelpful tip when attaching a label OperationRecording BasicPlayback BasicPlayback Before Playing backVolume control To turn off the powerBass control To interrupt playbackAdvanced Playback To locate the beginning of a trackUseful Features Advanced Playback Random play or repeat playTo interrupt fast playback To return to normal playbackAdvanced Recording Useful Features Advanced Recording Press the Mode button whilst the record- ing is pausedLong-play recording monaural recording Start recordingPress the right shuttle switch toward ENTER/SYNC You can erase a portion of a track and make a new recordingWhen a recording is paused or whilst recording… To create your own track numbersRecording tracks as a single track You can create your own track numbers at any pointAbout track numbers About sampling rate converterUseful Features Recording from a Microphone To write recorded contents on the MiniDiscRecording from a Microphone To record from a microphoneRecording from a Microphone Useful Track intervalsDuring a mic manual recording During a mic synchro recordingUseful Features Checking Displays Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonTo display the playing time of an indi Vidual trackTrack number and track name Press the Disp button to display the playChanging Default Settings FeaturesDefault Settings ChangingDisplay backlight on the remote control Auto power saveBeep sound Auto playTitling a MiniDisc AdvancedMiniDisc Titling aCharacters symbols To erase a characterTo enter a space To add charactersWhat is a master MiniDisc? What is a MiniDisc for stamping?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Advanced Features Press the right shuttle switch toward ENTER/SYNC againEditing a Recorded MiniDisc To erase tracks one at a timeTo divide a track To combine tracksPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track White Red AD-CA55XReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery Symptom Limitations MiniDisc System LimitationsError Messages Error MessagesReferences No Signal Tr. ProtectTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsDimensions WeightSignal readout Error correctionSharp Corporation