Sharp MD-MT866H operation manual Useful, Track intervals, During a mic manual recording

Page 35

Track intervals

When recording from the microphone, track num- bers will be created automatically at regular inter- vals (default setting: approximately every 5 min- utes). During a mic synchro recording, the unit pauses when a silence lasts for 3 seconds or more, and creates a track number.

Example: Set to “5 minutes”.

During a mic manual recording

●Timed auto marks will be created every 5 minutes.

Track	Track	Track	Track
number 1	number 2	number 3	number 4

–

Changing intervals between tracks

1 When a recording is paused or whilst re- cording, press the EDIT button repeatedly.

5 minutes

5 minutes

5 minutes

During a mic synchro recording

If a silence lasts for 3 seconds or more, a timed auto mark will be created 5 minutes after the previous mark is created.

Features from a Microphone

(A new track number is created every 5 minutes.)

(A new track number is created every 10 minutes.)

(A new track number is created every 3 minutes.)

(No automatic track numbers are created.)

:Track number which is created by the timed auto mark function.

:Track number which is created when a silence lasts for 3 sec- onds or more during synchro recording.

Track	Track	Track	Track	Track
number 1 number 2		number 3	number 4	number 5

Recording

Useful

●The interval between marks may vary slightly com- pared with the actual recording time.

2 Track numbers will be created automati- cally at regular intervals.

Creating track numbers manually

Press the REC button whilst recording.

2 minutes 5 minutes 1 minute 5 minutes

–

35

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 35

Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Special Notes Special NotesImportant Introduction Introduction Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsNames Remote control unitRemote control display panel IndicatorsFace the top Charge Toward you Mode Battery ChargerBattery- Charger Names Setting For use with the AC adaptor How to use the Charge / Operation switchBattery RemovingCharging Using with the Rechargeable BatteryPower Source Using with the Rechargeable Battery Display Conditions PowerAbout the liquid crystal display LCD About charging time Source Using with the AC AdaptorUsing with Operation modeRelease Lock Open PressHold Function Hold FunctionPreparation Inserting a MiniDisc Inserting a MiniDiscTo the DC in 5V socket To the Optical Line in socket ConnectionsConnections You can record your favorite CDs or tapes to an MDTo the Optical Line in socket To the DC50/60Hz 5V socket To the wall socket Before Recording RecordingBasic Operation Recording +12 -12dB Press the REC buttonDigital recording About the TOC To update the recorded contents of the MiniDiscTo interrupt recording To stop recordingBasic Helpful tip when attaching a labelOperation RecordingBefore Playing back PlaybackBasic PlaybackTo interrupt playback Volume controlTo turn off the power Bass controlTo locate the beginning of a track Advanced PlaybackTo return to normal playback Useful Features Advanced PlaybackRandom play or repeat play To interrupt fast playbackAdvanced Recording Start recording Useful Features Advanced RecordingPress the Mode button whilst the record- ing is paused Long-play recording monaural recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCYou can create your own track numbers at any point When a recording is paused or whilst recording…To create your own track numbers Recording tracks as a single trackAbout sampling rate converter About track numbersTo record from a microphone Useful Features Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a MicrophoneRecording from a Microphone During a mic synchro recording UsefulTrack intervals During a mic manual recordingDuring playback, press the Disp button Useful Features Checking DisplaysChecking Displays To check the elapsed time and remaining time of the trackPress the Disp button to display the play To display the playing time of an indiVidual track Track number and track nameChanging Changing Default SettingsFeatures Default SettingsAuto play Display backlight on the remote controlAuto power save Beep soundTitling a Titling a MiniDiscAdvanced MiniDiscTo add characters Characters symbolsTo erase a character To enter a spaceBefore stamping What is a master MiniDisc?What is a MiniDisc for stamping? Stamping titles from another MiniDiscOperation of the MiniDisc for stamping To erase tracks one at a time Advanced FeaturesPress the right shuttle switch toward ENTER/SYNC again Editing a Recorded MiniDiscPress the Edit button repeatedly to select Combine To divide a trackTo combine tracks Press the Edit button repeatedly to select DivideTo move a track AD-CA55X White RedRechargeable battery Other Features and CautionReferences Other Features and Caution Resuming auto play MiniDisc System Limitations Symptom LimitationsReferences Error MessagesError Messages Tr. Protect No SignalTroubleshooting TroubleshootingMoisture condensation MaintenanceMaintenance If trouble occursSpecifications SpecificationsError correction DimensionsWeight Signal readoutSharp Corporation