Sharp MD-MT866H operation manual Operation of the MiniDisc for stamping

Page 43

5 When the unit displays “CHANGE MD”, remove the master MiniDisc.

●Remove it without turning off the power. Or, the operation will be cancelled.

Operation of the MiniDisc for stamping

6 Load a MiniDisc for stamping.

7 Press the right shuttle switch toward “ENTER/SYNC”.

●The unit will finish recording the character infor- mation and enter the stop mode.

Notes:

●If the total number of tracks on the master MiniDisc does not match that on the MiniDisc for stamping, the unit will display “ Can't STAMP” and turn off the power.

If this happens, adjust the total number of tracks on the newly recorded MiniDisc using the edit operation.

●Use a MiniDisc that was recorded by this portable MD to make a MiniDisc for stamping. Character informa- tion may not be transferred if you use a MiniDisc re- corded by other equipment. In such a case, enter at least one character for the disc name or the track names. You can transfer information once you record the TOC.

Features	MiniDisc –
Advanced	– Titling a

43

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 43

Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsNames Remote control unitRemote control display panel IndicatorsBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode For use with the AC adaptor How to use the Charge / Operation switchBattery RemovingPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Source Using with the AC AdaptorUsing with Operation modeRelease Lock Open PressPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscTo the DC in 5V socket To the Optical Line in socket ConnectionsConnections You can record your favorite CDs or tapes to an MD50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB About the TOC To update the recorded contents of the MiniDiscTo interrupt recording To stop recordingBasic Helpful tip when attaching a labelOperation RecordingBefore Playing back PlaybackBasic PlaybackTo interrupt playback Volume controlTo turn off the power Bass controlTo locate the beginning of a track Advanced PlaybackTo return to normal playback Useful Features Advanced PlaybackRandom play or repeat play To interrupt fast playbackAdvanced Recording Start recording Useful Features Advanced RecordingPress the Mode button whilst the record- ing is paused Long-play recording monaural recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCYou can create your own track numbers at any point When a recording is paused or whilst recording…To create your own track numbers Recording tracks as a single trackAbout sampling rate converter About track numbersTo record from a microphone Useful Features Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a MicrophoneRecording from a Microphone During a mic synchro recording UsefulTrack intervals During a mic manual recordingDuring playback, press the Disp button Useful Features Checking DisplaysChecking Displays To check the elapsed time and remaining time of the trackPress the Disp button to display the play To display the playing time of an indiVidual track Track number and track nameChanging Changing Default SettingsFeatures Default SettingsAuto play Display backlight on the remote controlAuto power save Beep soundTitling a Titling a MiniDiscAdvanced MiniDiscTo add characters Characters symbolsTo erase a character To enter a spaceBefore stamping What is a master MiniDisc?What is a MiniDisc for stamping? Stamping titles from another MiniDiscOperation of the MiniDisc for stamping To erase tracks one at a time Advanced FeaturesPress the right shuttle switch toward ENTER/SYNC again Editing a Recorded MiniDiscPress the Edit button repeatedly to select Combine To divide a trackTo combine tracks Press the Edit button repeatedly to select DivideTo move a track AD-CA55X White RedReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery MiniDisc System Limitations Symptom LimitationsError Messages Error MessagesReferences Tr. Protect No SignalTroubleshooting TroubleshootingMoisture condensation MaintenanceMaintenance If trouble occursSpecifications SpecificationsError correction DimensionsWeight Signal readoutSharp Corporation