Sharp MD-MT866H Input sensitivity, Output level, Dimensions, Weight, Input socket, Output socket

Page 55

Input sensitivity

MIC H: reference input level

0.25 mV

input impedance

10 k ohms

MIC L:

reference input level

2.5 mV

input impedance

10 k ohms

LINE:

reference input level

100 mV

input impedance

20 k ohms

Output level

Earphones: maximum output level

5 mW + 5 mW

load impedance

32 ohms

LINE:

specified output

250 mV (-12 dB)

load impedance

10 k ohms

Dimensions

Width:

72.0 mm (2-27/32”)

Height:

19.5 mm (25/32”)

Depth: 78.9 mm (3-1/8”)

Weight

137 g (0.30 lbs.) with rechargeable battery

References

Specifications– –

Frequency response

20 – 20,000 Hz (± 3 dB)

Input socket

Line/optical digital, microphone (powered by the main unit)

Output socket

Earphones (impedance: 32 ohms)/remote control unit

Type

Portable MiniDisc recorder

Signal readout

Non-contact, 3-beam semi-conductor laser pick-up

Audio channels

Stereo 2 channels/monaural (long-play mode) 1 channel

Rotation speed

Approx. 400 – 1,350 rpm

Error correction

ACIRC (Advanced Cross Interleave Reed-Solomon Code)

Coding

ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed type

Recording method

Magnetic modulation overwrite method

Sampling frequency

44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.)

Wow and flutter

Unmeasurable (less than ±0.001% W. peak)

55

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 55

Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsNames Remote control unitRemote control display panel IndicatorsBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode For use with the AC adaptor How to use the Charge / Operation switchBattery RemovingPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Source Using with the AC AdaptorUsing with Operation modeRelease Lock Open PressPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscTo the DC in 5V socket To the Optical Line in socket ConnectionsConnections You can record your favorite CDs or tapes to an MD50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB About the TOC To update the recorded contents of the MiniDiscTo interrupt recording To stop recordingBasic Helpful tip when attaching a labelOperation RecordingBefore Playing back PlaybackBasic PlaybackTo interrupt playback Volume controlTo turn off the power Bass controlTo locate the beginning of a track Advanced PlaybackTo return to normal playback Useful Features Advanced PlaybackRandom play or repeat play To interrupt fast playbackAdvanced Recording Start recording Useful Features Advanced RecordingPress the Mode button whilst the record- ing is paused Long-play recording monaural recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCYou can create your own track numbers at any point When a recording is paused or whilst recording…To create your own track numbers Recording tracks as a single trackAbout sampling rate converter About track numbersTo record from a microphone Useful Features Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a MicrophoneRecording from a Microphone During a mic synchro recording UsefulTrack intervals During a mic manual recordingDuring playback, press the Disp button Useful Features Checking DisplaysChecking Displays To check the elapsed time and remaining time of the trackPress the Disp button to display the play To display the playing time of an indiVidual track Track number and track nameChanging Changing Default SettingsFeatures Default SettingsAuto play Display backlight on the remote controlAuto power save Beep soundTitling a Titling a MiniDiscAdvanced MiniDiscTo add characters Characters symbolsTo erase a character To enter a spaceBefore stamping What is a master MiniDisc?What is a MiniDisc for stamping? Stamping titles from another MiniDiscOperation of the MiniDisc for stamping To erase tracks one at a time Advanced FeaturesPress the right shuttle switch toward ENTER/SYNC again Editing a Recorded MiniDiscPress the Edit button repeatedly to select Combine To divide a trackTo combine tracks Press the Edit button repeatedly to select DivideTo move a track AD-CA55X White RedReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery MiniDisc System Limitations Symptom LimitationsError Messages Error MessagesReferences Tr. Protect No SignalTroubleshooting TroubleshootingMoisture condensation MaintenanceMaintenance If trouble occursSpecifications SpecificationsError correction DimensionsWeight Signal readoutSharp Corporation