Sharp MD-MT866H operation manual About track numbers, About sampling rate converter

Page 32

Advanced Recording (continued)

Advanced Recording –

Useful Features

About track numbers

1.Track numbers are created automatically during re- cording via the analogue connection when a silence of 1 second or more is detected (Auto marker func- tion). A series of tracks can be recorded as one by disabling the auto marker function see page 31.

 

About 1

 

second

 

Silence

First

Second

track

track

2.When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function).

When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source.

Track numbers may not be created properly, depending on the connected stereo system.

About sampling rate converter

This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape re- corders.

Note for digital recording

Playback side

Recording side

First track

Track A

First track

Track A

Second track Third track

Track B Track C

Second track Third track

Track B Track C

You can not copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected.

Digital signals

Digitally recorded

Cannot record

 

MiniDisc

 

32

Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise.

The track numbers on the playback side may not match the track numbers recorded on the MiniDisc.

CD player, MiniDisc player,

etc. DigitalDigital

connection connection

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 32
Contents MD-MT866H Thank you for purchasing this Sharp productAccessories Contents Special Notes Special NotesImportant Introduction Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitNames of Controls and Indicators Main unitImportant Introduction Names of Controls and Indicators Main unit display panelRemote control unit Remote control display panelIndicators NamesFace the top Charge Toward you Mode Battery ChargerBattery- Charger Names Setting How to use the Charge / Operation switch BatteryRemoving For use with the AC adaptorCharging Using with the Rechargeable BatteryPower Source Using with the Rechargeable Battery Display Conditions PowerAbout the liquid crystal display LCD About charging time Using with the AC Adaptor Using withOperation mode SourceOpen Press Release LockHold Function Hold FunctionPreparation Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socketTo the Optical Line in socket To the DC50/60Hz 5V socket To the wall socket Before Recording RecordingBasic Operation Recording +12 -12dB Press the REC buttonDigital recording To update the recorded contents of the MiniDisc To interrupt recordingTo stop recording About the TOCHelpful tip when attaching a label OperationRecording BasicPlayback BasicPlayback Before Playing backVolume control To turn off the powerBass control To interrupt playbackAdvanced Playback To locate the beginning of a trackUseful Features Advanced Playback Random play or repeat playTo interrupt fast playback To return to normal playbackAdvanced Recording Useful Features Advanced Recording Press the Mode button whilst the record- ing is pausedLong-play recording monaural recording Start recordingPress the right shuttle switch toward ENTER/SYNC You can erase a portion of a track and make a new recordingWhen a recording is paused or whilst recording… To create your own track numbersRecording tracks as a single track You can create your own track numbers at any pointAbout track numbers About sampling rate converterUseful Features Recording from a Microphone To write recorded contents on the MiniDiscRecording from a Microphone To record from a microphoneRecording from a Microphone Useful Track intervalsDuring a mic manual recording During a mic synchro recordingUseful Features Checking Displays Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonTo display the playing time of an indi Vidual trackTrack number and track name Press the Disp button to display the playChanging Default Settings FeaturesDefault Settings ChangingDisplay backlight on the remote control Auto power saveBeep sound Auto playTitling a MiniDisc AdvancedMiniDisc Titling aCharacters symbols To erase a characterTo enter a space To add charactersWhat is a master MiniDisc? What is a MiniDisc for stamping?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Advanced Features Press the right shuttle switch toward ENTER/SYNC againEditing a Recorded MiniDisc To erase tracks one at a timeTo divide a track To combine tracksPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track White Red AD-CA55XRechargeable battery Other Features and CautionReferences Other Features and Caution Resuming auto play Symptom Limitations MiniDisc System LimitationsReferences Error MessagesError Messages No Signal Tr. ProtectTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsDimensions WeightSignal readout Error correctionSharp Corporation