Sharp MD-MT866H operation manual MiniDisc System Limitations, Symptom Limitations

Page 49

MiniDisc System Limitations

The unit may have the following symptoms whilst recording or editing. The unit is not out of order.

SYMPTOM		LIMITATIONS

“DISC FULL” or “TOC FULL” appears even though the MiniDisc still has re- cording time left.

More than 255 tracks (maximum) cannot be recorded regardless of the re- cording time.

If the MiniDisc is recorded or edited repeatedly or if it has scratches (record- ing skips scratched parts), you may not be able to record the maximum tracks above.

The remaining recording time does not The unit does not count non-recorded portions that last 12 or fewer seconds increase even though you erased tracks. to display the remaining recording time. The time may not increase even if

you erase short tracks.

The total of the recorded time and the One cluster (approximately 2 seconds) is the minimum unit for recording. remaining time does not match the maxi- For example, a 3-second track uses 2 clusters (approximately 4 seconds).

mum recordable time.Therefore, the actual recordable time may be shorter than the displayed time.

Combine function does not work. A MiniDisc on which recording and editing are repeated may not allow the combine function.

Sound skips in fast reverse/forward. One track is divided and recorded in separate places on a repeatedly re- corded or edited MiniDisc.

Sound may skip.

A track number is created in the middle A track number may be created if there are scratches or dust on the MiniDisc. of a track.

References	MiniDisc System Limitations –
	–

49

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 49

Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Important Introduction Special NotesSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsRemote control display panel Remote control unitIndicators NamesBattery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode Battery How to use the Charge / Operation switchRemoving For use with the AC adaptorPower Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Using with Using with the AC AdaptorOperation mode SourceRelease Lock Open PressPreparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB To interrupt recording To update the recorded contents of the MiniDiscTo stop recording About the TOCOperation Helpful tip when attaching a labelRecording BasicBasic PlaybackPlayback Before Playing backTo turn off the power Volume controlBass control To interrupt playbackTo locate the beginning of a track Advanced PlaybackRandom play or repeat play Useful Features Advanced PlaybackTo interrupt fast playback To return to normal playbackAdvanced Recording Press the Mode button whilst the record- ing is paused Useful Features Advanced RecordingLong-play recording monaural recording Start recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCTo create your own track numbers When a recording is paused or whilst recording…Recording tracks as a single track You can create your own track numbers at any pointAbout sampling rate converter About track numbersTo write recorded contents on the MiniDisc Useful Features Recording from a MicrophoneRecording from a Microphone To record from a microphoneRecording from a Microphone Track intervals UsefulDuring a mic manual recording During a mic synchro recordingChecking Displays Useful Features Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonVidual track To display the playing time of an indiTrack number and track name Press the Disp button to display the playFeatures Changing Default SettingsDefault Settings ChangingAuto power save Display backlight on the remote controlBeep sound Auto playAdvanced Titling a MiniDiscMiniDisc Titling aTo erase a character Characters symbolsTo enter a space To add charactersWhat is a MiniDisc for stamping? What is a master MiniDisc?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Press the right shuttle switch toward ENTER/SYNC again Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a timeTo combine tracks To divide a trackPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track AD-CA55X White RedReferences Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery MiniDisc System Limitations Symptom LimitationsError Messages Error MessagesReferences Tr. Protect No SignalTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsWeight DimensionsSignal readout Error correctionSharp Corporation