Sharp MD-MT866H Stamping titles from another MiniDisc, Before stamping, Insert a Master MiniDisc

Page 42

Titling a MiniDisc (continued)

Features	MiniDisc –
Advanced	– Titling a

42

Stamping titles from another MiniDisc

Before stamping

When there are 2 MiniDiscs on which the same tracks are recorded, you can transfer the character information (disc and track names) of the Master MiniDisc to another MiniDisc (for stamping).

1.What is a master MiniDisc?

A recordable MiniDisc that contains tracks and char- acter information.

(You can not transfer the information from a play- back only MiniDisc.)

2.What is a MiniDisc for stamping?

A MiniDisc that contains the same tracks in the same order as the master MiniDisc.

(Make sure that the total number of tracks of the master MiniDisc and the one for stamping are the same.)

Master MiniDisc operation

1 Insert a Master MiniDisc.

● Do not mistake the Master MiniDisc for the target one.

●If you turn off the unit after inserting the master MD, the operation from step 2 may not allow the unit to stamp the titles correctly.

2 Whilst in the stop mode, press the EDIT but- ton repeatedly to select “NAME STAMP”.

3 Press the right shuttle switch toward “ENTER/SYNC”.

●To cancel the operation, press the • ■ / :OFF button.

4 Press the right shuttle switch toward “ENTER/SYNC”.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 42

Contents MD-MT866H Thank you for purchasing this Sharp productAccessories Contents Special Notes Important IntroductionSpecial Notes Introduction Avoid using or leaving the unit in the following places PrecautionsPrecautions Storing the unitNames of Controls and Indicators Main unitImportant Introduction Names of Controls and Indicators Main unit display panelIndicators Remote control unitRemote control display panel NamesBattery Charger Battery- Charger Names SettingFace the top Charge Toward you Mode Removing How to use the Charge / Operation switchBattery For use with the AC adaptorUsing with the Rechargeable Battery Power Source Using with the Rechargeable BatteryCharging Power About the liquid crystal display LCD About charging timeDisplay Conditions Operation mode Using with the AC AdaptorUsing with SourceOpen Press Release LockHold Function PreparationHold Function Inserting a MiniDisc Inserting a MiniDiscYou can record your favorite CDs or tapes to an MD ConnectionsConnections To the DC in 5V socket To the Optical Line in socketTo the DC 50/60Hz 5V socket To the wall socketTo the Optical Line in socket Recording Basic Operation RecordingBefore Recording Press the REC button Digital recording+12 -12dB To stop recording To update the recorded contents of the MiniDiscTo interrupt recording About the TOCRecording Helpful tip when attaching a labelOperation BasicPlayback PlaybackBasic Before Playing backBass control Volume controlTo turn off the power To interrupt playbackAdvanced Playback To locate the beginning of a trackTo interrupt fast playback Useful Features Advanced PlaybackRandom play or repeat play To return to normal playbackAdvanced Recording Long-play recording monaural recording Useful Features Advanced RecordingPress the Mode button whilst the record- ing is paused Start recordingPress the right shuttle switch toward ENTER/SYNC You can erase a portion of a track and make a new recordingRecording tracks as a single track When a recording is paused or whilst recording…To create your own track numbers You can create your own track numbers at any pointAbout track numbers About sampling rate converterRecording from a Microphone Useful Features Recording from a MicrophoneTo write recorded contents on the MiniDisc To record from a microphoneRecording from a Microphone During a mic manual recording UsefulTrack intervals During a mic synchro recordingTo check the elapsed time and remaining time of the track Useful Features Checking DisplaysChecking Displays During playback, press the Disp buttonTrack number and track name To display the playing time of an indiVidual track Press the Disp button to display the playDefault Settings Changing Default SettingsFeatures ChangingBeep sound Display backlight on the remote controlAuto power save Auto playMiniDisc Titling a MiniDiscAdvanced Titling aTo enter a space Characters symbolsTo erase a character To add charactersStamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? Before stampingOperation of the MiniDisc for stamping Editing a Recorded MiniDisc Advanced FeaturesPress the right shuttle switch toward ENTER/SYNC again To erase tracks one at a timePress the Edit button repeatedly to select Divide To divide a trackTo combine tracks Press the Edit button repeatedly to select CombineTo move a track White Red AD-CA55XOther Features and Caution References Other Features and Caution Resuming auto playRechargeable battery Symptom Limitations MiniDisc System LimitationsError Messages Error MessagesReferences No Signal Tr. ProtectTroubleshooting TroubleshootingIf trouble occurs MaintenanceMaintenance Moisture condensationSpecifications SpecificationsSignal readout DimensionsWeight Error correctionSharp Corporation