Beep sound
You can eliminate the confirmation sound that beeps when you press a button.
Display backlight on the remote control
“EL ON 1”
When any button is pressed, the backlight will re- main lit for about 10 seconds.
“EL ON 2”
When the rechargeable battery, alkaline battery or car adaptor is used, the backlight will remain lit for about 10 seconds.
When the battery charger is used and the power is turned on, the backlight will always be lit.
“EL OFF”
Light will not be turned on.
Auto play
You can make the unit not play automatically when you insert a
Auto power save
When the unit is used in a place exposed to much vibration, sound skipping can be decreased by can- celling the auto power save function. (Battery will drain faster.)
Digital recording level
“D.L MODE 1”
The digital recording level you set will be kept even after canceling recording.
“D.L MODE 2”
Every time you cancel recording, the level will re- turn to [ D.L 0dB ].
Refresh
If you charge the battery before it runs out completely, the operating time may be shortened. To avoid this, the battery will be discharged and refreshed auto- matically. You can cancel this function.
LCD edge light
Whilst in [ LIGHT ON ] mode, LCD edge lights flash according to the function.
What is auto power save function?
Auto power save function automatically adjusts the sound skip memory storage to be from 5 to10 seconds depend- ing on playback conditions, this saves battery power.
If the MiniDisc unit is used in areas of much vibration it may be necessary to fix the sound skip memory to 10 seconds “Psave OFF (PS off)” this will improve perfor- mance under difficult conditions but uses more power. (When the AC/car adaptor is used the 10 second mode is always used.)
Features | Default Settings – |
Useful | Changing |
| – |
39