Sharp MD-MT866H operation manual Recording from a Microphone, To record from a microphone

Page 33

Recording from a Microphone

To record from a microphone

To the MIC IN socket

Stereo microphone (commercially available)

1 Connect a stereo microphone to the MIC IN socket.

2 Insert a recordable MiniDisc (page 17).

3 Press the REC button.

4 Move the right shuttle switch to 5 or 4 to adjust the recording level.

Level meter indicator

0dB 4dB

●Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between –4 dB and 0 dB.

5 Press the 06 button.

●Recording will start.

To interrupt a recording

Press the 06 button whilst recording.

●To resume recording, press the 06 button again.

The track number will be increased by one each time you interrupt a recording.

To stop recording

Press the • ■ / :OFF button.

To write recorded contents on the MiniDisc

Press the • ■ / :OFF button whilst in the stop mode.

Useful Features – Recording from a Microphone –

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 33

Contents Thank you for purchasing this Sharp product MD-MT866HAccessories Contents Special Notes Important IntroductionSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unitMain unit Names of Controls and IndicatorsMain unit display panel Important Introduction Names of Controls and IndicatorsRemote control display panel Remote control unitIndicators NamesBattery Charger Battery- Charger Names SettingFace the top Charge Toward you Mode Battery How to use the Charge / Operation switchRemoving For use with the AC adaptorUsing with the Rechargeable Battery Power Source Using with the Rechargeable BatteryCharging Power About the liquid crystal display LCD About charging timeDisplay Conditions Using with Using with the AC AdaptorOperation mode SourceRelease Lock Open PressHold Function PreparationHold Function Inserting a MiniDisc Inserting a MiniDiscConnections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socketTo the DC 50/60Hz 5V socket To the wall socketTo the Optical Line in socket Recording Basic Operation RecordingBefore Recording Press the REC button Digital recording+12 -12dB To interrupt recording To update the recorded contents of the MiniDiscTo stop recording About the TOCOperation Helpful tip when attaching a labelRecording BasicBasic PlaybackPlayback Before Playing backTo turn off the power Volume controlBass control To interrupt playbackTo locate the beginning of a track Advanced PlaybackRandom play or repeat play Useful Features Advanced PlaybackTo interrupt fast playback To return to normal playbackAdvanced Recording Press the Mode button whilst the record- ing is paused Useful Features Advanced RecordingLong-play recording monaural recording Start recordingYou can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNCTo create your own track numbers When a recording is paused or whilst recording…Recording tracks as a single track You can create your own track numbers at any pointAbout sampling rate converter About track numbersTo write recorded contents on the MiniDisc Useful Features Recording from a MicrophoneRecording from a Microphone To record from a microphoneRecording from a Microphone Track intervals UsefulDuring a mic manual recording During a mic synchro recordingChecking Displays Useful Features Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp buttonVidual track To display the playing time of an indiTrack number and track name Press the Disp button to display the playFeatures Changing Default SettingsDefault Settings ChangingAuto power save Display backlight on the remote controlBeep sound Auto playAdvanced Titling a MiniDiscMiniDisc Titling aTo erase a character Characters symbolsTo enter a space To add charactersWhat is a MiniDisc for stamping? What is a master MiniDisc?Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping Press the right shuttle switch toward ENTER/SYNC again Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a timeTo combine tracks To divide a trackPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select CombineTo move a track AD-CA55X White RedOther Features and Caution References Other Features and Caution Resuming auto playRechargeable battery MiniDisc System Limitations Symptom LimitationsError Messages Error MessagesReferences Tr. Protect No SignalTroubleshooting TroubleshootingMaintenance MaintenanceIf trouble occurs Moisture condensationSpecifications SpecificationsWeight DimensionsSignal readout Error correctionSharp Corporation