SpectraLink manual SpectraLink 8002 Wireless Telephone Configuration

Page 29

SpectraLink 8002 Wireless Telephone Configuration

The TFTP server and the SIP TFTP server may be the same device with the same IP address or may be different devices with different IP addresses.

Default Gateway and Subnet Mask Used to identify subnets, when using a complex network, which includes routers. Both of these must be configured either with an IP address under Static IP (not set to 000.000.000.000 or 255.255.255.255) or with DHCP for the handset to contact any network components on a different subnet. If configured on the DHCP server, use option 3 for the Default Gateway and option 1 for the Subnet Mask. Contact the network administrator for the proper settings for the network.

Note that the wireless telephones cannot “roam” across subnets, since they cannot change IP addresses while operational. Ensure that all APs are attached to the same subnet for proper operation. The handset can change subnets if DHCP is enabled and the handset is powered-off then back on when within range of only APs on the new subnet.

Syslog Server IP The IP address of the syslog server. See Chapter 5 Diagnostic Tools for more information.

SIP TFTP Server IP The IP address of a TFTP server on your network, which holds SIP configuration files. In static mode, this parameter must be configured with an IP address. In DHCP mode, the SIP TFTP server may be specified by defining the address on the DNS server for the name “siptftp” If this is not defined, the address specified in option 66 will be used.

The TFTP server and the SIP TFTP server may be the same device with the same IP address or may be different devices with different IP addresses.

OAI Server IP The IP address of the SpectraLink OAI Gateway. If using Static IP configuration, this is simply the IP address of the SpectraLink OAI Gateway. If DHCP is being used, the handset will try the DHCP option 152.

PN: 1725-36034-001_B.doc

29

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Image 29
Contents Administration Guide Patent Information Trademark InformationCopyright Notice Contact InformationKnowledge base to assist troubleshooting is available at Essential Installation PointersData APs may not support VoWiFi Page Related Documents About this GuidePolycom Model Numbers Icons and Conventions Customer Support HotlineContents Using the SIP Handset Programming the SIP Handset FeaturesTesting a Handset Diagnostic Tools Software License and Protocol ManagementIndex Page WMM-Compatible Access Points SpectraLink Wireless Telephone OverviewSecurity Options Security Preferred Channels Quick Start GuideSIP Servers System DiagramAccess points SpectraLink 8002 Wireless TelephoneEthernet switch System ComponentsSIP phone SIP serverTftp server SIP Tftp serverWMM Handset SpecificationsWPA2-PSK DHCP, TftpIcon Icons shown in bold turns off when Startup SequenceEXT XxxxxSpectraLink 8002 Wireless Telephone Overview Page SpectraLink 8002 Wireless Telephone Configuration Opening the Admin menu Admin Administration MenuEntering and editing Admin menu options Alphanumeric string entryTo Enter Press Admin Menu Items 2nd Level 3rd Level 4th Level 5th Level Admin menuESS ID WEPAdmin Menu Items 2nd Level 3rd Level 4th Level 5th Level License Option Phone ConfigSIP Registration OAI On/OffIP Address Network ConfigAdmin Password Option Meaning SpectraLink 8002 Wireless Telephone Configuration Essid Security Regulatory Domain Transmit PowerRestore Defaults DiagnosticsStandby mode, options menu User-defined Preferences Standby MenuPBX Standby menuStandby Menu Items 2nd Level 3rd Level 4th Level Server IP Addr Firmware Version Telephone Ring Lock KeysRing Options Phone Options Phone IP Addr System InfoServer IP Addr Firmware VersionPage Requirements Software License and Protocol ManagementConfiguration Process Software License and Protocol Management Page Guidelines Programming the SIP Handset FeaturesSIP Tftp Server Configuration Files Handset-specific files e.g. sip3001.cfg Generic file sipallusers.cfgParameter Value Description Proxy server commandsMailsubscr ECSZero Codecs MailnotifyAuth Favorite SIPallusers.cfg Sample Configuration Files# PROXY1MAILACCESS = PROXY1KEEPALIVESECS=14 #PROXY1ADDR #PROXY2ADDR Sample handset-specific fileLINE1 LINE2CALLID Line indicators Using the SIP HandsetHandset Display OverviewBattery charge Signal strengthIndicator Function Handset iconsActive mode off-hook Standby mode on-hookHandset modes DownloadSoftkey Name Displayed… Press to… Messaging modeSoftkeys Softkey Name Displayed… Press to… Favorites menu MenusLine menu Menu display FCN menuHandset Operation Feature activationAlphanumeric dialing If you want to… Then…Line 1 your dial number To dialed number Hold Rej Mute Line 1 your dial number Fr caller ID Answ Rej =Fr caller ID Rsme Mute End If you want to… Then… OAI Page Testing a Handset Page Site Survey Diagnostic ToolsM T E e e e M G g g g g P p Solving coverage issues Diagnostics ModeM m m c h s s a i d M m c h s s m n e m E m ScreenC o u N n n A s U n t Syslog Mode Events Full Message type ErrorsMAC AP MACCall Start Call type telephony, OAI, PTT Messages are formatted like the following example Conducting a site survey Certifying the InstallationPN 1725-36034-001B.doc Upgrading handsets Software MaintenanceNormal download messages Message DescriptionTftp Download failure or recovery messagesAccess point problems TroubleshootingRange/out-of-range CapacityTransmission obstructions Configuration problemsAssert Handset Status MessagesMessage Description Action Message Description Action Dhcp OFF Do not PowerEssid LANCRC Message Description Action Page Appendix a Regulatory Domains Max. Power Limit peak powerDomain Band Channels Identifier 4000 2.4745 MHz CountriesPN 1725-36034-001B.doc Coverage Coverage test Index