SpectraLink 8002 manual Syslog Mode

Diagnostic Tools

•Association failures since power up (AssocFailure)

•Re-association failures since power up (ReAssocFail)

Screen 5

S

e c

-

E

r

r

C o u n

t

n

n

n

n

n

L

s t

S e

c E

r r S e

q

n

n

n

n

n

•Security error count since power up (Sec-ErrCount)

•MAC sequence number of frame with last security error (LstSecErrSeq)

Syslog Mode

A syslog server must be present on the network in order for the handset to send the log messages and have them saved. The syslog server will be found with DHCP option 7 if the handset is using DHCP. If static addresses are configured, the syslog server’s IP address can be configured statically in the Admin menu.

If the syslog server address is blank (000.000.000.000 or 255.255.255.255), or the handset is using DHCP and no option 7 is received from the DHCP server, the handset will not send any syslog messages.

Admin menu options:

•*Disabled turns syslog off. (default)

•Errors causes the handset to log only events that are considered to be an error (see below).

•Events logs all errors plus also some other interesting events (see below).

•Full logs all the above plus a running stream of other quality information (see below).

PN: 1725-36034-001_B.doc 79

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299