# PROXY1MAILACCESS = | SpectraLink 8002 specification

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)

#PROXYn_MAIL_NOTIFY is from whom we might get unsolicited mail center

#notifications

#This option is deprecated and no longer needed in versions beyond

#e/h340/i640 phones v108.011, Polycom 8002 phones v130.001, and Polycom

#8020/8030 phones 131.001.

#Examples:

#PROXY1_MAIL_NOTIFY = asterisk@10.0.0.138 #PROXY1_MAIL_NOTIFY = sip:asterisk@10.0.0.138

#PROXY1_MAIL_ACCESS is the main voicemail dial number

#Examples:

#PROXY1_MAIL_ACCESS = 7999

#PROXY1_MAIL_ACCESS = sip:7999@10.0.0.138

#PROXY1_MAIL_ACCESS = 7999@10.0.0.138

#PROXY1_KEYPRESS_2833 controls generation of in-stream RFC2833 formatted key

#press events. Normally you want this to be disabled for Asterisk but it

#depends on your configuration and what you want to be able to do.

#If you are going to do OAI integration, this must be disabled.

#The default is disable

PROXY1_KEYPRESS_2833 = disable

#PROXY1_KEYPRESS_INFO controls generation of SIP INFO requests to the SIP

#server for keypress events. Normally you want this to be enabled.

#If you are going to do OAI integration, this must be enabled.

#The default is enable

PROXY1_KEYPRESS_INFO = enable

#PROXYn_HOLD_IP0 controls setting of media stream IP destination to 0.0.0.0

#when a call is put on hold.

#PROXYn_HOLD_IP0 is not required for current versions of Asterisk.

#For older PBXs that require this, set this to enable

#PROXYn_HOLD_IP0 = enable

#PROXY1_PRACK enables ACK'd provisional responses to INVITE requests. The

#PRACK mechanism will be used if this switch is enabled and the Proxy server

#specifies support for the PRACK mechanism. PRACK is NOT SUPPORTED in

#current versions of Asterisk, but is to be supported on subsequent

#versions. PRACK should not be required on local area networks.

PROXY1_PRACK = disable

#PROXYn_KEEPALIVE_SECS specifies that the phone should send Keep alives to

#the PROXYn server. It can be set to 0 or anywhere from 10 to 3600

#seconds. The default value (which is applied if no parameter is supplied

#in this file) is 0 which means the phone will not send keep_alives to

#PROXYn.

#If the phone fails to get a keepalive response within the SIP 32 second

#timeout, the keepalives are terminated for that PROXY until the next

#successful registration to the PROXY.

#This parameter is REQUIRED on Asterisk Business Edition with the Polycom

#8002 phone but not with the Polycom 8020/8030 phones. This is because

52	PN: 1725-36034-001_B.doc

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299