SpectraLink 8002 manual PROXY1KEEPALIVESECS=14

Page 53

Programming the SIP Handset Features

#Linux, the OS running Asterisk, has a ARP Cache flushing mechanism. This

#feature serves to refresh the ARP Cache for the 8002 phones. For 8020 and

#8030 phones, the ARP Cache is refreshed by the SVP server. 8020/8030

#phones do not know how to parse this parameter.

#

#The value of this parameter for 8002 phones should be just less than the

#minimum ARP Cache flushing time on the Linux box running Asterisk. For

#Redhat this minimum flushing time is 15 seconds, so the parameter needs to

#be set for 14 seconds or less. For other Linux Distributions, you may

#have to determine what this minimum value is, however 14 seconds should

#work fine.

#

#The lower this setting, the more the impact on the 8002's standby battery

#life.(8002 phones running version 130.003 and earlier code ignore this

#parameter if present)

#(8020/8030 phones ignore this parameter if present no matter the SW

#version)

PROXY1_KEEPALIVE_SECS=14

#PROXYn_REREG_SECS specifies the re-registration interval for a PROXY.

#This is the requested expiration interval sent in the REGISTER request

#message. It can be set to anything between 35 and 3600 seconds.

#The default value (which is applied if no parameter is supplied in this

#file) is 3600 which means the phone will attempt to register every 3580

#seconds, if the server's response interval doesn't take precedence (see

#below).

#

#If the server has a lower maximum setting or a higher minimum setting that

#this value then the server's response will take precedence and this

#parameter will be ignored.

#

#The phone will always attempt to re-register with the PROXY 20 seconds

#prior to the expiration interval. Thus, if this parameter is set to 35

#seconds, and the server's response interval doesn't take precedence, then

#the phone will attempt to re-register every 15 seconds.

#

#The lower this setting, the more the impact on the 8002's standby battery

#life.

#(8002 phones running version 130.003 and earlier code ignore this

#parameter if present)

#(8020/8030 phones ignore this parameter if present no matter the SW version) PROXY1_REREG_SECS=3600

#Favorites in the allusers file will be present in the favorites on all

#handsets

#The username can be blank and can include escaped chars

#Useful features can be included such as call forwarding or dialing

#voicemail

#FAVORITE = dial_string; username

FAVORITE = 1234; Site Security

FAVORITE = *98; Call Forwarding

PN: 1725-36034-001_B.doc

53

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Image 53
Contents Administration Guide Patent Information Trademark InformationCopyright Notice Contact InformationKnowledge base to assist troubleshooting is available at Essential Installation PointersData APs may not support VoWiFi Page Related Documents About this GuidePolycom Model Numbers Icons and Conventions Customer Support HotlineContents Using the SIP Handset Programming the SIP Handset FeaturesTesting a Handset Diagnostic Tools Software License and Protocol ManagementIndex Page WMM-Compatible Access Points SpectraLink Wireless Telephone OverviewSecurity Options Security Preferred Channels Quick Start GuideSIP Servers System DiagramAccess points SpectraLink 8002 Wireless TelephoneEthernet switch System ComponentsSIP phone SIP serverTftp server SIP Tftp serverWMM Handset SpecificationsWPA2-PSK DHCP, TftpIcon Icons shown in bold turns off when Startup SequenceEXT XxxxxSpectraLink 8002 Wireless Telephone Overview Page SpectraLink 8002 Wireless Telephone Configuration Opening the Admin menu Admin Administration MenuEntering and editing Admin menu options Alphanumeric string entryTo Enter Press Admin Menu Items 2nd Level 3rd Level 4th Level 5th Level Admin menuESS ID WEPAdmin Menu Items 2nd Level 3rd Level 4th Level 5th Level License Option Phone ConfigSIP Registration OAI On/OffIP Address Network ConfigAdmin Password Option Meaning SpectraLink 8002 Wireless Telephone Configuration Essid Security Regulatory Domain Transmit PowerRestore Defaults DiagnosticsStandby mode, options menu User-defined Preferences Standby MenuPBX Standby menuStandby Menu Items 2nd Level 3rd Level 4th Level Server IP Addr Firmware Version Telephone Ring Lock KeysRing Options Phone Options Phone IP Addr System InfoServer IP Addr Firmware VersionPage Requirements Software License and Protocol ManagementConfiguration Process Software License and Protocol Management Page Guidelines Programming the SIP Handset FeaturesSIP Tftp Server Configuration Files Handset-specific files e.g. sip3001.cfg Generic file sipallusers.cfgParameter Value Description Proxy server commandsMailsubscr ECSZero Codecs MailnotifyAuth Favorite SIPallusers.cfg Sample Configuration Files# PROXY1MAILACCESS = PROXY1KEEPALIVESECS=14 #PROXY1ADDR #PROXY2ADDR Sample handset-specific fileLINE1 LINE2CALLID Line indicators Using the SIP HandsetHandset Display OverviewBattery charge Signal strengthIndicator Function Handset iconsActive mode off-hook Standby mode on-hookHandset modes DownloadSoftkey Name Displayed… Press to… Messaging modeSoftkeys Softkey Name Displayed… Press to… Favorites menu MenusLine menu Menu display FCN menuHandset Operation Feature activationAlphanumeric dialing If you want to… Then…Line 1 your dial number To dialed number Hold Rej Mute Line 1 your dial number Fr caller ID Answ Rej =Fr caller ID Rsme Mute End If you want to… Then… OAI Page Testing a Handset Page Site Survey Diagnostic ToolsM T E e e e M G g g g g P p Solving coverage issues Diagnostics ModeM m m c h s s a i d M m c h s s m n e m E m ScreenC o u N n n A s U n t Syslog Mode Events Full Message type ErrorsMAC AP MACCall Start Call type telephony, OAI, PTT Messages are formatted like the following example Conducting a site survey Certifying the InstallationPN 1725-36034-001B.doc Upgrading handsets Software MaintenanceNormal download messages Message DescriptionTftp Download failure or recovery messagesAccess point problems TroubleshootingRange/out-of-range CapacityTransmission obstructions Configuration problemsAssert Handset Status MessagesMessage Description Action Message Description Action Dhcp OFF Do not PowerEssid LANCRC Message Description Action Page Appendix a Regulatory Domains Max. Power Limit peak powerDomain Band Channels Identifier 4000 2.4745 MHz CountriesPN 1725-36034-001B.doc Coverage Coverage test Index