SpectraLink 8002 manual Oai

		Using the SIP Handset
If you want to…		Then…
Listen to voicemail		When any proxy has outstanding messages, the voicemail icon will display.
		The LINE menu will display a plus (+) indication when there is a new
		voicemail for that line. Indications are cleared when the handset receives
		notification that all new voicemail messages have been read.
		37 Press START and dial the number assigned to message retrieval and
		press START again.
		38 Follow system instructions to retrieve messages.
		Alternately, if a PROXYn_MAIL_ACCESS value has been configured for the
		corresponding proxy, the voicemail system can also be accessed by
		pressing the Msg softkey, which will appear after selecting a line and before
		beginning to dial.
Do Not Disturb		Press FCN 2. The handset will not ring for new incoming calls.
(reject all incoming calls)		When the do-not-disturb feature is enabled, the standby screen will display
		Do Not Disturb.
Clear Do Not Disturb		Press FCN 2 again to resume ringing for new incoming calls.
Redial the last number		39 Press START.
you dialed		40 Press Redl.
		41 Verify that the displayed number is the one you want and the line # is
		valid.
		42 Press START.
Activate a registered OAI		43 Press START.
function on an	OAI	44 Press FCN.
server
		45 Navigate to desired OAI function using Up and Down buttons.
		46 Select the OAI function using the Select button or shortcut key.
Silence while ringing		Press the END key to silence the ring.
Adjust	the	While the headset is plugged in, press the up/down volume buttons on the
headset volume		side of the handset during the call.
End the call		Press the END key to return to the standby mode.
Turn on the backlight		The backlight comes on when any key is pressed or when there is an
		incoming call, and stays on for 10 seconds. It turns off if another key is not
		pressed for 10 seconds.

PN: 1725-36034-001_B.doc 69

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299