Vision Fitness T9350, T9600, T9500, T9450, T9700, T9300, T9200 manual Deck RE-WAXING Procedure

DECK RE-WAXING PROCEDURE

Frequency: Every 1 month.

LUBE

Name: DOW CORNING 350 SILICON

Procedure:

1.Loosen the tension bolts at both ends.

2.Pull the belt with your left hand and apply the silicon in the deck with your right hand. (The volume of silicon applied is about 25CC.)

3.Tighten the tension bolts.

4.Start the treadmill. Step on the treadmill belt to walk the silicon in. Adjust the belt tension if necessary.

5.With the clamp-on meter, measure the current draw of the motor. (Clamp

on either the red or the black wire.) The current should be less than 15Amps for 110V model. (less than 7.5Amps for 220V model.)

1-3