Vision Fitness T9500, T9600, T9450, T9700, T9300, T9200, T9350 manual Lubricating the AIR Shock

Page 8

LUBRICATING THE AIR SHOCK

Frequency: Every 6 months.

Procedure:

1.Fold up the frame by using the deck-locking lever.

2.Add the lubricating oil on the shaft of the air shock.

3.Lift the frame up and down, repeating this several times to allow the lubricating oil blend into air shock.

1-5

Image 8

Contents Page Table of Contents Section Preventive Maintenance Schedule Running Belt Drive BeltDeck RE-WAXING Procedure ProcedureClean the Grooves Procedure Lubricating the AIR Shock Wiring Diagram Instruction T9700TM51D/E MCB Wiringfor 110V T9300 MCB Wiringfor 110V T9200/T9250 MCB Wiringfor 110V Console Engineering Mode Guide T9700TM51D/E Treadmills for Software Ver KEY Behale Function Remarks T9600HRTCOMFORT/T9600HRT/T9500HRT/T9450HRT Select SOU=SOURCES Parameter SCO=SCOPE Parameter 10MIL Remarks T9200/T9250 Treadmills for Software Ver. S706 Sources MCB LED Instructions MCB LED Indication MCB MCB LED Indication PWM MCB LED Chart MCB LED-AIDED Troubleshooting Chart Troubleshootings No display on console Possible causesRunning speed is not stable Treadmill starts to run by itself All or some of the keys on console do not workNoises generated under motor cover FixTreadmill will not start Incline function does not work Heart-Rate-Control function does not work Error Messages on the Console T9700 TM51D/E Error code definitionTroubleshootings T9200/T9250 Error code definition Software Upgrade Procedure Vision Series Treadmill Software Upgrade SOP Steps