P13 | ELV DIR | Change the incline altitude | 255 | 0 | 255 |
|
|
|
|
|
|
P14 | ELV ERRS | Change the altitude error switch, 0=OFF, 1=ON | 0 | 0 | 1 |
|
|
|
|
|
|
P15 | SCROLL | set the change display show letter speed | 7 | 1 | 255 |
|
|
|
|
|
|
P16 | LUBE HRS | Accumulate the after one lube to now hour | 0 | 0 | 0xffff |
|
|
|
|
|
|
P17 | CLEAN | Accumulate the after clean to now distance | 0 | 0 | 0xffff |
|
|
|
|
|
|
P18 | BRUSH | Accumulate the change motor brush to now distance | 0 | 0 | 0xffff |
|
|
|
|
|
|
P19 | EXIT | Go away the engineer mode | |||
|
|
|
|
|
|
Remarks:
1.After execute indicated service, please enter the engineer mode to press the STOP keyfor 3~5 sec to renew of the P16 ,P17 or P18.
2.If you want to the clean accumulate time and distance, please press the "ELEVATION UP and DOWN" for 5 sec of user mode.
Error code definition
Error | Definition |
E4 | Incline motor parameter over the set |
E5 | Incline motor not to movement |
E6 | Incline motor the signal not answer |
E7 | Speed over the 2.0 mph km/h |