| Error Messages on the Console | |
|
|
|
| T9700 (TM51D/E) Error code definition | |
|
|
|
Error | Definition | |
E4 | Incline motor parameter over the set | |
E5 | Incline motor not to movement | |
E6 | Incline motor the signal not answer | |
E7 | Speed over the 2.0 mph km/h | |
Error Message "E4" : Please enter the engineer mode to execute the
AUTO-CAL MODE.
Error Message "E5" : 1. Please check the incline motor cable whether to inset MCB.
2.Check the console signal whether transmission to MCB, you can refer to MCB LED UP and DOWN. If LED not light please check the console cable and console. If LED have light please replace the incline motor.
Error Message " E6" : 1. Please check the incline motor cable whether to inset MCB.
2. Replace the incline motor
Error Message " E7" : Please enter the engineer mode to execute the