Vision Fitness T9500, T9600, T9450, T9700, T9300, T9350 T9200/T9250 Treadmills for Software Ver. S706

T9200/T9250 TREADMILLS ( for Software Ver. S706)

How to enter into the engineering mode?

1. Press & Hold both “ELEVATION UP” and “SPEED DOWN” at the same time for3-5 sec. Then, the dot vision display first will show

VERSION ” follow show ENG 1 ”

2. Press the "ELEVATION" or "SPEED" to select you want and press the "START" key enter.

Display show	function interpret
ENG1	set the treadmill all parameter
ENG2	console LED test mode
ENG3	treadmill running test mode
ENG4	Auto-calibration mode
KEY BEHALE FUNCTION
key name	function
STOP	Hold STOP key for 3 sec will Come
	back to above mode
SPEED UP and ELEVATION UP	Add this show parameter of speed
	and elevation
SPEED DOWN and ELEVATION	Decrease this show parameter of
DOWN	speed and elevation
START	To Store up the parameter

3-9