NordicTrack NCTL09990 manual Operation and Adjustment

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE		TM WALKING BELT		electric shock. This product is equipped with a cord
				having an equipment-grounding conductor and a
Your treadmill features a walking belt coated with				grounding plug.	Plug the power cord into a surge
PERFORMANT LUBE	TM	, a high-performance lubricant.		protector, and plug the surge protector into an ap-
Important: Never apply silicone spray or other sub-				propriate outlet that is properly installed and
stances to the walking belt or the walking platform.				grounded in accordance with all local codes and
They will deteriorate the walking belt and cause ex-				ordinances.
cessive wear.
				This product is for use on a nominal 120-volt circuit,
HOW TO PLUG IN THE POWER CORD				and has a grounding plug that looks like the plug illus-
				trated in drawing 1 below. A temporary adapter that
DANGER:				looks like the adapter illustrated in drawing 2 may be
		Improper connection		used to connect the surge protector to a 2-pole recep-
				tacle as shown in drawing 2 if a properly grounded out-
of the equipment-grounding conductor can
				let is not available.
result in an increased risk of electric shock.
Check with a qualified electrician or service-				The temporary adapter should be used only until a
man if you are in doubt as to whether the
				properly grounded outlet (drawing 1) can be installed
product is properly grounded. Do not modify
				by a qualified electrician.
the plug provided with the product—if it will
not fit the outlet, have a proper outlet in-				The green-colored rigid ear, lug, or the like extending
stalled by a qualified electrician.
				from the adapter must be connected to a permanent
				ground such as a properly grounded outlet box cover.
Your treadmill, like any other type of sophisticated				Whenever the adapter is used it must be held in place
				by a metal screw.	Some 2-pole receptacle outlet box
electronic equipment, can be seriously damaged by
				covers are not grounded. Contact a qualified elec-
sudden voltage changes in your home’s power.
				trician to determine if the outlet box cover is
Voltage surges, spikes, and noise interference can re-
				grounded before using an adapter.
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos-		1
sibility of your tread-				Grounded Outlet Box
mill being damaged,					Treadmill Power Cord
always use a surge				Grounding Pin
protector (not in-
cluded) with your				Grounding Plug	Grounding Plug
treadmill.
Surge protectors are					Grounding Pin
sold at most hardware			Grounded Outlet
stores and department
stores. Use only a CUL-
listed surge protector,		2
rated at 15 amps, with a			Grounded Outlet Box
14-gauge cord of five
feet or less in length.				Adapter
This product must be				Grounding Pin
grounded.	If it should			Grounding Plug		Surge Protector
malfunction or break
down, grounding pro-		Lug
vides a path of least re-
		Metal Screw
sistance for electric cur-
rent to reduce the risk of

8