Healthrider HRTL07120 manual Cord, Console do not func, Tion properly, Top, View

Page 27

PROBLEMSOLUTION

4.The walking belt is off-center or slips when walked on

a. If the walking belt is off-center, first re-

a

move the key and

UNPLUG THE POWER

 

CORD

. If the walking belt has shifted to

 

the left, use the allen wrench to turn the

 

left rear roller bolt clockwise 1/2 of a turn;

if

the walking belt has shifted to the right,

 

turn the bolt counterclockwise 1/2 of a turn.

 

Be careful not to overtighten the walking

 

belt. Plug in the power cord, insert the key

 

and run the treadmill for a few minutes.

 

Repeat until the walking belt is centered.

 

 

b. If the walking belt slips when walked on,

 

b

 

 

first remove the key and

UNPLUG THE

 

 

 

 

 

 

 

POWER CORD

. Using the allen wrench,

 

 

 

 

turn both rear roller bolts clockwise 1/4 of a

 

 

 

 

turn. When the walking belt is correctly

 

 

 

 

tightened, you should be able to lift each

 

 

 

 

side of the walking belt 3 to 4 inches off the

 

 

 

 

walking platform. Be careful to keep the

 

 

 

 

walking belt centered. Plug in the power

 

 

 

 

cord, insert the key, and walk on the tread-

 

 

 

 

mill for a few minutes. Repeat until the walking belt is properly tightened.

 

5. The displays of the

a. Remove the key from the console and

 

UN-

a

 

console do not func-

PLUG THE POWER CORD.

 

Next, remove

 

 

 

 

1/8”

 

tion properly

the screws from the hood and carefully re-

 

 

 

44

11

 

move the hood. Locate the Reed Switch

 

 

 

 

 

 

 

 

 

 

12

 

(17) and the Magnet (12) on the left side of

 

17

 

the Pulley (11). Turn the Pulley until the

 

Top

 

 

Magnet is aligned with the Reed Switch.

 

 

 

Make sure that the gap between the

 

 

View

 

 

Magnet and the Reed Switch is about

 

 

 

 

 

1/8”.If necessary, loosen the indicated

 

 

 

 

Screw (44) and move the Reed Switch slightly. Retighten the Screw. Re-attach the

 

 

hood and run the treadmill for a few minutes to check for a correct speed reading.

 

6.The heart rate monitor does not function properly

a. If the heart rate monitor does not function properly, refer to CHEST PULSE SENSOR TROUBLESHOOT-

ING on page 8.

b. If the heart rate monitor still does not function properly, the battery should be changed. To replace the battery, locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover and turn the cover counterclockwise to the “open” position.

Remove the cover.

Next, remove the old battery from the sensor unit.

Insert a new CR 2032 battery , making sure that the writing is on top. In addition, make sure that the rubber gasket is in place in the sensor unit. Replace the bat-

tery cover and turn it to the closed position.

b

CR2032

Battery

Rubber

Gasket

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Customer HOT Line QUESTIONS?Model No. HRTL07120 Serial No Serial Number DecalTable of Contents Important Precautions Never drop or insert any object into any open- ing Back Before YOU BeginAssembly Rubber malletCutters Screws yet Cover and the Latch Housing as shownSelf near the center of the walking belt HOW to PUT on the Chest Pulse SensorChest Pulse Sensor Care and Maintenance Chest Pulse Sensor TroubleshootingUse only a single-outlet surge suppressor that is HOW to Plug in the Power CordTreadmill Operation Performant LubeSteps beginning on Features of the ConsoleKey Clear ClipHOW to USE the Manual Mode Speed display -This See page 23 and turn off the demo modePulse/Calories/Fat Distance/Incline/LapsOne column to the left HOW to USE Preset Workout ProgramsPress the Start button or the Speed Start the programPut on the chest pulse sensor 4Follow your progress with the displaysTurn on the fans if desired From the consoleEach heart rate program is divided into several time 4Enter your age and a maximum speed settingTons beside the Enter button to adjust the maxi Tered your age, press Buttons besideBe saved in memory HOW to Create Custom ProgramsProgram indicators lights SettingsThree columns of indi Cators are lit Matrix, see HOW to HOW to USE Custom ProgramsWhen the program has ended, remove the key Select one of the custom programsHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes Adapter Cable HOW to Connect Your Home StereoHOW to Connect Your Computer Plug the adapter into the Line OUT jack on your stereoPrograms HOW to Connect Your VCRRefer to on Does not change when a chirp is heard See onConsole. However See onHOW to USE Programs Directly from OUR WEB Site Speed Information MODE/DEMO ModeCalories/Fat Calories dis If a d ap Left foam grip HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for Storage Hold the treadmill in the locations shown at the rightHOW to Lower the Treadmill for USE Hold the treadmill firmly with both hands, and lowerFoam Troubleshooting ProblemsolutionUnplug Power Cord Top CordConsole do not func Tion properlyExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty 117 Console Base Key No. Qty Description104 126 Controller Screw 105 Heart Rate Sensor 127 116 Right Foam GripPart No R1202A HOW to Order Replacement PartsLimited Warranty Icon Health & FITNESS, INC., 1500 S W., LOGAN, UTExploded R1202A
Top Page Image Contents