Healthrider HRTL07120 manual Treadmill Operation, Performant Lube, HOW to Plug in the Power Cord

Page 9

TREADMILL OPERATION

THE PERFORMANT LUBE

TM WALKING BELT

Your treadmill features a walking belt coated with

PERFORMANT LUBETM , a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can

result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances

being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at

the right). To purchase a surge suppressor, see your local HealthRider dealer or call 1-800-806-3651 and order part number 146148.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indi- cate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed or stop unexpect- edly, which may result in a fall and serious injury.

This product must be grounded.If it should malfunc-

tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This product is equipped with a cord having

an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Important: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,

and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly

grounded outlet is not available.

1

Grounded Outlet Box

 

Surge Suppressor

 

Grounding Pin

Grounding Pin

 

Grounded Outlet

Grounding Plug

 

2

Grounded Outlet Box

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a

properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place

by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is grounded before using an adapter.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model No. HRTL07120 Serial No QUESTIONS?Serial Number Decal Customer HOT LineTable of Contents Important Precautions Never drop or insert any object into any open- ing Back Before YOU Begin Assembly Rubber mallet Cutters Screws yet Cover and the Latch Housing as shownChest Pulse Sensor Care and Maintenance HOW to PUT on the Chest Pulse SensorChest Pulse Sensor Troubleshooting Self near the center of the walking beltTreadmill Operation HOW to Plug in the Power CordPerformant Lube Use only a single-outlet surge suppressor that isKey Clear Features of the ConsoleClip Steps beginning onHOW to USE the Manual Mode Pulse/Calories/Fat See page 23 and turn off the demo modeDistance/Incline/Laps Speed display -ThisPress the Start button or the Speed HOW to USE Preset Workout ProgramsStart the program One column to the leftTurn on the fans if desired 4Follow your progress with the displaysFrom the console Put on the chest pulse sensorTons beside the Enter button to adjust the maxi 4Enter your age and a maximum speed settingTered your age, press Buttons beside Each heart rate program is divided into several timeProgram indicators lights HOW to Create Custom ProgramsSettings Be saved in memoryWhen the program has ended, remove the key HOW to USE Custom ProgramsSelect one of the custom programs Three columns of indi Cators are lit Matrix, see HOW toHOW to Connect Your Portable CD Player HOW to Connect Your Portable StereoVideocassettes HOW to Connect Your Computer HOW to Connect Your Home StereoPlug the adapter into the Line OUT jack on your stereo Adapter CablePrograms HOW to Connect Your VCRConsole. However Does not change when a chirp is heard See onSee on Refer to onHOW to USE Programs Directly from OUR WEB Site Calories/Fat Calories dis Information MODE/DEMO ModeIf a d ap SpeedHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHold the treadmill in the locations shown at the right Left foam gripHOW to Lower the Treadmill for USE Hold the treadmill firmly with both hands, and lowerFoam Troubleshooting ProblemsolutionUnplug Power Cord Console do not func CordTion properly TopExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty 104 126 Controller Screw 105 Heart Rate Sensor 127 Key No. Qty Description116 Right Foam Grip 117 Console BaseLimited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R1202AExploded R1202A
Top Page Image Contents