Jabra GO 6470 user manual Headset Controls and Signals, Touch panel, Audio signal tones

Page 41

If two paired devices are turned on and in range but fail to connect automatically, you can connect manually. Do the following, as needed:

-Use the base touchscreen, as described in the section “Forcing Reconnection/Disconnection via the touchscreen”.

-Use the menu system on your mobile phone, as described in your phone’s documentation

You can drop the connection from the headset to your mobile phone (for example, because you would like to connect your mobile phone to another device) in a similar way.

See also the section ”Managing Bluetooth® Connections and the Pairing Table”.

7.5Headset Controls and Signals

All Jabra GO headsets feature a collection of controls and indicators that enable you to manage and monitor your calls. These are:

1.Multifunction button

This button is located near the back of the headset. Through a combination of taps, double-taps, short presses and long presses, you will be able to execute all of the most-needed functions, including answering a call, hanging up, switching between held calls, and more.

2.Touch panel

This touch-sensitive panel is similar to the touch pad included with many laptop computers. It enables you to adjust the speaker volume and mute/unmute the microphone.

3.Audio signal tones

The headset generates several types of soft signal tones to let you know when you have an incoming call, muted call, call on hold, low battery, or other type of event. It also responds each time you use the multifunction button.

4.Headset visual indicator

A multicolor LED lets others see when you are on the phone and also gives feedback for certain types of events, such as low battery, incoming call, etc.

3

2

4

1

 

Figure 44: Jabra GO headset controls and indicators

The Multifunction Button

The table below summarizes the various gestures recognized by the multifunction button. The terms listed in the table are often used in this manual when describing how to use the headset.

Gesture name

How to make it

 

 

Tap

Tap and release instantly (not longer than 0.8 seconds).

 

 

Double tap

Two quick taps (less than half a second between them).

 

 

Press

Press and hold the button for 1 - 3 seconds.

 

 

Long press

Press and hold the button for 3 - 5 seconds.

 

 

Table 2: Gestures for using the headset multifunction button; the terms here are used throughout this manual.

Jabra GO 6470 User manual

41

Image 41
Contents Jabra GO Contents Daily Use Calling, Answering and Hanging Up 10.1 Jabra GO Touchscreen Base10.2 10.311.2 11.111.4 11.5Jabra GO Base features Jabra GO Headset featuresJabra GO Travel Charger features IntroductionRead the Safety guide Protecting your Hearing with SafeTone Important Safety InformationIntellitone Noise-Exposure Protection Protection level Criteria for selectingOther Specifications Care and MaintenanceProduct Overview Package ContentsJabra GO 6400 series accessories Optional AccessoriesMultifunction button answer/end call, among other functions Jabra GO Headset DiagramJabra GO base, seen from the front and back, respectively Jabra GO Base DiagramSetup Overview and Background System Setup and ConnectionsAssembling the Jabra GO Base and Headset Quick-Start Setup WizardApply Power to the Jabra GO Base Wearing the Jabra GO headset in various styles Assemble the HeadsetPlace the Headset in its Cradle Identifying Your Desk Phone Features Connecting the Jabra GO Base to Your Desk PhoneStandard desk phone Desk phone with headset portConnecting to a desk phone without a headset port Connecting to a Desk Phone without a Headset PortConnecting to a Proprietary Headset Port Connecting to a Standard Headset PortSetting the Clear Dial-tone Switch to find a Clear Dial-tone Configuring the Jabra GO Base for Your Desk PhoneIf the Jabra GO base cannot contact the Jabra test server Setting the Microphone LevelSet microphone level Using a Handset Lifter or Electronic HookswitchGN1000 Connecting to the GN1000 Remote Handset LifterGN1000 Connecting to a Phone using RHL Mode Connecting to a Phone with an Electronic HookswitchConnecting to a Load-detect equipped Phone Pairing Your Headset with a Mobile Phone Connecting the Jabra GO Base to Your ComputerConfiguring the base for your softphone Installing and Running the Jabra PC Suite Check for Updates result window in Jabra Control Center Applying Firmware UpdatesCentral Administration and Mass Deployment Headset Visual and Audio Indicators Headset Controls and IndicatorsDaily Use Calling, Answering and Hanging Up Target Phone ConceptStandard Mobile Phone Dialing How to Make a CallCalling through a Softphone Voice-Activated Mobile Phone DialingCalling through a Desk Phone How to answer a callFor all other types of phones Hanging upDo one of the following to answer the call Desk Phones Controlling the Speaker Volume and MicrophoneSwitching between Your Phone and Headset Managing Call Collisions and Call Waiting Last Number RedialManaged from the headset Listening to MusicJabra GO Headset How to Wear the HeadsetAssembling or Changing the Wearing Style Attaching the Ear Hook for either EarPairing the Headset with a Mobile Phone Pairing with Bluetooth wireless technology DevicesReplacing the Earbud Attaching the Head- or NeckbandManaging Your Bluetooth Connections Pairing the Headset with a Jabra GO BaseAudio signal tones Headset Controls and SignalsHeadset visual indicator Gesture name How to make itFunction Tap Double Press Long Press State or event Tone description Headset Signal TonesHeadset state Choosing Voice or Tones for Target indicatorsHeadset Visual Indicators LED POwer save mode Battery Indicators and RechargeBattery indicators Recharging the HeadsetStaying within Range High capacity Jabra Go InstallationsMicrophone Noise Blackout Narrowband vs. Wideband AudioMaking and changing Connections Managing Bluetooth Connections and the Pairing TableClearing the Bluetooth Pairing Table Mobile phone connection is lost Using the Touchscreen Jabra GO Base Connections and SetupJabra GO Touchscreen Base Status barFor MSH Users Only Standard OperationCall Options Call options menuPC & Softphone Phone menuManaging Call Collision Msh phone active call screenOne or more calls on hold call waiting Managing Call WaitingManaging call waiting one or more calls are on hold Settings SettingS MenuHeadset Docking-Operation Advanced settings menuSetup Wizard touch here to run the whole setup wizard Jabra GO Base Audio IndicatorsTheft Protection Replacing the CradleShown Web conferencingCall Switching Audio-hold and call switchingOverview what is possible? To display Audio On-HOLDStoring the Headset and USB Bluetooth Adapter Using the Jabra GO Travel ChargerJabra GO Travel Charger Diagram Communicating with a PC Charging the Headset with the Travel ChargerJabra Link 350 USB Bluetooth Adapter Diagram Jabra Link 350 USB Bluetooth AdapterPurpose of the USB Bluetooth Adapter Jabra Link 350 USB Bluetooth Adapter Setup and ConnectionConstant blue light Pairing the Adapter and HeadsetSlow-flashing green light Jabra Link 350 USB Bluetooth Adapter MFB Jabra Link 350 USB Bluetooth Adapter Visual IndicatorsAdapter Status LED Signal Function Tap PressWhy doesn’t my computer detect the Jabra GO 6470 base? FAQs and TroubleshootingHow do I pair my headset with the Jabra GO 6470 base? Can’t contact the dial-in server. What should I do?Hear myself when I talk using my desk phone. What can I do? What is the Talk Time of a Jabra GO 6400 HEADSET? What is the range on the Jabra GO 6470?Europe Getting AssistanceMiddle East/Africa USA and CanadaHeadset Hearing Protection Technical SpecificationsHeadset Jabra GO Base Headset BatteryMaterials and Allergies Jabra Link 350 USB Bluetooth Adapter Product Disposal Certifications and Safety ApprovalsJabra GO Travel Charger GlOSSARY Wideband audio USB Bluetooth adapterSoftphone driver RevD