Jabra GO 6470 Pairing the Adapter and Headset, Slow-flashing green light, Constant blue light

Page 65

-Slow-flashing green light:

The headset and USB Bluetooth® Adapter are paired but not (yet) connected. Connection occurs automatically — as long as your headset is switched on and close by, the headset tries to connect periodically and indefinitely. When the light changes to constant green or yellow (see above), your headset is connected.

-Constant blue light:

The headset and USB Bluetooth® Adapter are not yet paired. The adapter is in pairing mode. This means that you need to pair the headset to the USB Bluetooth® Adapter before you connect them. See the section “Pairing the Adapter and Headset” for instructions.

4.You are now ready to use your headset with your computer. If you have not already done so, then install the Jabra PC Suite software as described in Chapter 5: Installing and Running the Jabra PC Suite; see also the PC Suite online help.

11.4 Pairing the Adapter and Headset

To pair your Jabra GO headset and Jabra LINK 350 USB Bluetooth® Adapter:

1.Attach the USB Bluetooth® Adapter to your PC and turn on the PC (see also the section 10.3: Jabra LINK 350 USB Bluetooth® Adapter Setup and Connection).

2.Put the USB Bluetooth® Adapter in pairing mode by pressing and holding its multifunction button for about 2 seconds — until its blue pairing LED turns on and stays lit.

3.If your headset is currently turned on, turn it off by pressing and holding on its multifunction button for about 4 seconds — until its LED gives three quick red flashes and then turns off.

4.Put your (powered-off) headset in pairing mode by pressing and holding on its multifunction button for about 4 seconds — until its LED lights a constant blue.

5.Place the headset close to the USB Bluetooth® Adapter and wait for a few seconds. When pairing is successful, you will see the following indicators:

-On the adapter: the LED flashes blue quickly five times and turns off.

-On the headset: the LED flashes blue five times and then turns off.

6.Your headset and USB Bluetooth® Adapter are now paired and connected.

Figure 78: Jabra GO headset paired with both a mobile phone and the Jabra LINK 350 USB Bluetooth® Adapter

Jabra GO 6470 User manual

65

Image 65

Contents Jabra GO Contents Daily Use Calling, Answering and Hanging Up 10.1 Jabra GO Touchscreen Base10.2 10.311.2 11.111.4 11.5Jabra GO Base features Jabra GO Headset featuresJabra GO Travel Charger features IntroductionRead the Safety guide Protecting your Hearing with SafeTone Important Safety InformationIntellitone Noise-Exposure Protection Protection level Criteria for selectingOther Specifications Care and MaintenanceProduct Overview Package ContentsJabra GO 6400 series accessories Optional AccessoriesMultifunction button answer/end call, among other functions Jabra GO Headset DiagramJabra GO base, seen from the front and back, respectively Jabra GO Base DiagramSetup Overview and Background System Setup and ConnectionsAssembling the Jabra GO Base and Headset Quick-Start Setup WizardApply Power to the Jabra GO Base Wearing the Jabra GO headset in various styles Assemble the HeadsetPlace the Headset in its Cradle Identifying Your Desk Phone Features Connecting the Jabra GO Base to Your Desk PhoneStandard desk phone Desk phone with headset portConnecting to a desk phone without a headset port Connecting to a Desk Phone without a Headset PortConnecting to a Proprietary Headset Port Connecting to a Standard Headset PortSetting the Clear Dial-tone Switch to find a Clear Dial-tone Configuring the Jabra GO Base for Your Desk PhoneIf the Jabra GO base cannot contact the Jabra test server Setting the Microphone LevelSet microphone level Using a Handset Lifter or Electronic HookswitchGN1000 Connecting to the GN1000 Remote Handset LifterGN1000 Connecting to a Phone using RHL Mode Connecting to a Phone with an Electronic HookswitchConnecting to a Load-detect equipped Phone Pairing Your Headset with a Mobile Phone Connecting the Jabra GO Base to Your ComputerConfiguring the base for your softphone Installing and Running the Jabra PC Suite Check for Updates result window in Jabra Control Center Applying Firmware UpdatesCentral Administration and Mass Deployment Headset Visual and Audio Indicators Headset Controls and IndicatorsDaily Use Calling, Answering and Hanging Up Target Phone ConceptStandard Mobile Phone Dialing How to Make a CallCalling through a Softphone Voice-Activated Mobile Phone DialingCalling through a Desk Phone How to answer a callFor all other types of phones Hanging upDo one of the following to answer the call Desk Phones Controlling the Speaker Volume and MicrophoneSwitching between Your Phone and Headset Managing Call Collisions and Call Waiting Last Number RedialManaged from the headset Listening to MusicJabra GO Headset How to Wear the HeadsetAssembling or Changing the Wearing Style Attaching the Ear Hook for either EarPairing the Headset with a Mobile Phone Pairing with Bluetooth wireless technology DevicesReplacing the Earbud Attaching the Head- or NeckbandManaging Your Bluetooth Connections Pairing the Headset with a Jabra GO BaseAudio signal tones Headset Controls and SignalsHeadset visual indicator Gesture name How to make itFunction Tap Double Press Long Press State or event Tone description Headset Signal TonesHeadset state Choosing Voice or Tones for Target indicatorsHeadset Visual Indicators LED POwer save mode Battery Indicators and RechargeBattery indicators Recharging the HeadsetStaying within Range High capacity Jabra Go InstallationsMicrophone Noise Blackout Narrowband vs. Wideband AudioMaking and changing Connections Managing Bluetooth Connections and the Pairing TableClearing the Bluetooth Pairing Table Mobile phone connection is lost Using the Touchscreen Jabra GO Base Connections and SetupJabra GO Touchscreen Base Status barFor MSH Users Only Standard OperationCall Options Call options menuPC & Softphone Phone menuManaging Call Collision Msh phone active call screenOne or more calls on hold call waiting Managing Call WaitingManaging call waiting one or more calls are on hold Settings SettingS MenuHeadset Docking-Operation Advanced settings menuSetup Wizard touch here to run the whole setup wizard Jabra GO Base Audio IndicatorsTheft Protection Replacing the CradleShown Web conferencingCall Switching Audio-hold and call switchingOverview what is possible? To display Audio On-HOLDStoring the Headset and USB Bluetooth Adapter Using the Jabra GO Travel ChargerJabra GO Travel Charger Diagram Communicating with a PC Charging the Headset with the Travel ChargerJabra Link 350 USB Bluetooth Adapter Diagram Jabra Link 350 USB Bluetooth AdapterPurpose of the USB Bluetooth Adapter Jabra Link 350 USB Bluetooth Adapter Setup and ConnectionConstant blue light Pairing the Adapter and HeadsetSlow-flashing green light Jabra Link 350 USB Bluetooth Adapter MFB Jabra Link 350 USB Bluetooth Adapter Visual IndicatorsAdapter Status LED Signal Function Tap PressWhy doesn’t my computer detect the Jabra GO 6470 base? FAQs and TroubleshootingHow do I pair my headset with the Jabra GO 6470 base? Can’t contact the dial-in server. What should I do?Hear myself when I talk using my desk phone. What can I do? What is the Talk Time of a Jabra GO 6400 HEADSET? What is the range on the Jabra GO 6470?Europe Getting AssistanceMiddle East/Africa USA and CanadaHeadset Hearing Protection Technical SpecificationsHeadset Jabra GO Base Headset BatteryMaterials and Allergies Jabra Link 350 USB Bluetooth Adapter Product Disposal Certifications and Safety ApprovalsJabra GO Travel Charger GlOSSARY Wideband audio USB Bluetooth adapterSoftphone driver RevD