Jabra GO 6470 Daily Use Calling, Answering and Hanging Up, Headset Controls and Indicators

Page 30

6. Daily Use — Calling, Answering and Hanging Up

6.1Headset Controls and Indicators

The Multifunction Button

This button is located near the back of the headset. Through a combination of taps, double-taps, short presses and long presses, you will be able to execute all of the most-needed functions, including answering a call, hanging up, switching between held calls, and more.

See the section “Headset Controls and Signals” for more.

Headset Visual and Audio Indicators

The headset provides status messages using both lights and audio signals. For example, the LED lights various colors to indicate battery level, incoming calls, on/off operations, etc. Audio signals tell you when you have pressed a button, selected a new target phone or changed the volume; in-ear ring tones are also provided.

See the section “Headset Controls and Signals” for more.

6.2The Target Phone Concept

The target phone is the phone to which the audio link for your (outgoing) call is activated when you tap the multifunction button (MFB) on the headset or touch the green handset icon on the touchscreen. You can select a different target phone by touching a phone icon or pressing the headset MFB.

The large foreground phone icon indicates the current target phone.

 

1. Current target phone: this large icon indicates the phone to which

 

you will open a connection if you tap the headset multifunction

2

button or touch the green handset icon at the bottom of the screen.

Double-tapthe headset multifunction button to redial on this

 

phone (selected mobile and softphones only).

 

Double-tap the headset multifunction button to redial on this phone

 

(selected mobile and softphones only).

 

2. Other phones: touch the appropriate icon here to change the

1

current target phone — or press the headset multifunction button

when no call is active.

Figure 32: The current target phone is indicated by the large icon on the touchscreen; change the target by touching on one of the other icons.

The effect of activating the audio link to an idle target phone varies depending on the gesture you use on the MFB, on your set-up and on the features supported by your phone — for mobile phones you can activate voice- activated dialing or redial, for desk phones with a hook lifter you lift the handset off-hook, for softphones you can open the audio link and for some softphones redial.

If you initiate an outgoing call from a mobile- or softphone, the audio link opens automatically when the phone goes off-hook.This phone-initiated outgoing call does not affect your choice of target phone.

For incoming calls on phones with ring detection — as is the case with mobile phones, most softphones and desk phones with a hook lifter or electronic hookswitch (EHS) — the ringing phone is indicated by a large ringing icon and activating MFB/green handset icon accepts the call. When the incoming call ends, the target phone returns to the selected target phone before the incoming call.

For phones where ring detection is not possible, you have to change the target phone manually before you can accept the call. In this case, when the call ends the target phone is the phone for which you accepted the call.

For maximum convenience, set the target phone to the phone which you are most likely to use for outgoing calls.

Jabra GO 6470 User manual

30

Image 30
Contents Jabra GO Contents Daily Use Calling, Answering and Hanging Up 10.2 Jabra GO Touchscreen Base10.1 10.311.4 11.111.2 11.5Jabra GO Travel Charger features Jabra GO Headset featuresJabra GO Base features IntroductionIntellitone Noise-Exposure Protection Important Safety InformationRead the Safety guide Protecting your Hearing with SafeTone Protection level Criteria for selectingCare and Maintenance Other SpecificationsPackage Contents Product OverviewOptional Accessories Jabra GO 6400 series accessoriesJabra GO Headset Diagram Multifunction button answer/end call, among other functionsJabra GO Base Diagram Jabra GO base, seen from the front and back, respectivelySystem Setup and Connections Setup Overview and BackgroundQuick-Start Setup Wizard Apply Power to the Jabra GO BaseAssembling the Jabra GO Base and Headset Assemble the Headset Wearing the Jabra GO headset in various stylesPlace the Headset in its Cradle Standard desk phone Connecting the Jabra GO Base to Your Desk PhoneIdentifying Your Desk Phone Features Desk phone with headset portConnecting to a Desk Phone without a Headset Port Connecting to a desk phone without a headset portConnecting to a Standard Headset Port Connecting to a Proprietary Headset PortConfiguring the Jabra GO Base for Your Desk Phone Setting the Clear Dial-tone Switch to find a Clear Dial-toneSetting the Microphone Level If the Jabra GO base cannot contact the Jabra test serverUsing a Handset Lifter or Electronic Hookswitch Set microphone levelConnecting to the GN1000 Remote Handset Lifter GN1000GN1000 Connecting to a Phone with an Electronic Hookswitch Connecting to a Load-detect equipped PhoneConnecting to a Phone using RHL Mode Connecting the Jabra GO Base to Your Computer Configuring the base for your softphonePairing Your Headset with a Mobile Phone Installing and Running the Jabra PC Suite Applying Firmware Updates Check for Updates result window in Jabra Control CenterCentral Administration and Mass Deployment Daily Use Calling, Answering and Hanging Up Headset Controls and IndicatorsHeadset Visual and Audio Indicators Target Phone ConceptHow to Make a Call Standard Mobile Phone DialingVoice-Activated Mobile Phone Dialing Calling through a SoftphoneHow to answer a call Calling through a Desk PhoneHanging up Do one of the following to answer the callFor all other types of phones Controlling the Speaker Volume and Microphone Switching between Your Phone and HeadsetDesk Phones Last Number Redial Managing Call Collisions and Call WaitingListening to Music Managed from the headsetAssembling or Changing the Wearing Style How to Wear the HeadsetJabra GO Headset Attaching the Ear Hook for either EarReplacing the Earbud Pairing with Bluetooth wireless technology DevicesPairing the Headset with a Mobile Phone Attaching the Head- or NeckbandPairing the Headset with a Jabra GO Base Managing Your Bluetooth ConnectionsHeadset visual indicator Headset Controls and SignalsAudio signal tones Gesture name How to make itFunction Tap Double Press Long Press Headset Signal Tones State or event Tone descriptionChoosing Voice or Tones for Target indicators Headset Visual Indicators LEDHeadset state Battery indicators Battery Indicators and RechargePOwer save mode Recharging the HeadsetMicrophone Noise Blackout High capacity Jabra Go InstallationsStaying within Range Narrowband vs. Wideband AudioManaging Bluetooth Connections and the Pairing Table Clearing the Bluetooth Pairing TableMaking and changing Connections Mobile phone connection is lost Jabra GO Touchscreen Base Jabra GO Base Connections and SetupUsing the Touchscreen Status barStandard Operation For MSH Users OnlyCall options menu Call OptionsPhone menu PC & SoftphoneMsh phone active call screen Managing Call CollisionManaging Call Waiting One or more calls on hold call waitingManaging call waiting one or more calls are on hold SettingS Menu SettingsAdvanced settings menu Headset Docking-OperationTheft Protection Jabra GO Base Audio IndicatorsSetup Wizard touch here to run the whole setup wizard Replacing the CradleWeb conferencing ShownAudio-hold and call switching Overview what is possible?Call Switching Audio On-HOLD To displayUsing the Jabra GO Travel Charger Jabra GO Travel Charger DiagramStoring the Headset and USB Bluetooth Adapter Charging the Headset with the Travel Charger Communicating with a PCPurpose of the USB Bluetooth Adapter Jabra Link 350 USB Bluetooth AdapterJabra Link 350 USB Bluetooth Adapter Diagram Jabra Link 350 USB Bluetooth Adapter Setup and ConnectionPairing the Adapter and Headset Slow-flashing green lightConstant blue light Adapter Status LED Signal Jabra Link 350 USB Bluetooth Adapter Visual IndicatorsJabra Link 350 USB Bluetooth Adapter MFB Function Tap PressHow do I pair my headset with the Jabra GO 6470 base? FAQs and TroubleshootingWhy doesn’t my computer detect the Jabra GO 6470 base? Can’t contact the dial-in server. What should I do?Hear myself when I talk using my desk phone. What can I do? What is the range on the Jabra GO 6470? What is the Talk Time of a Jabra GO 6400 HEADSET?Middle East/Africa Getting AssistanceEurope USA and CanadaTechnical Specifications HeadsetHeadset Hearing Protection Headset Battery Materials and AllergiesJabra GO Base Jabra Link 350 USB Bluetooth Adapter Certifications and Safety Approvals Jabra GO Travel ChargerProduct Disposal GlOSSARY USB Bluetooth adapter Softphone driverWideband audio RevD