Jabra GO 6470 user manual Headset Battery, Materials and Allergies, Jabra GO Base

Page 72

14.3 Headset Battery

Battery type:

Lithium Ion

Battery capacity:

125 mAh, nominal

Battery talk time:

Up to 6h at -10˚C to +60˚C

Battery lifetime:

Minimum 500 charge cycles (over 3 years when used for 8 hours a day)

Battery standby time:

At least 100h at -10˚C to +60˚C

Battery charge time:

-Charging from mains power adapter; from 0 to 80% of full capacity in 25mins

-Charging from car charger; from 0 to 80% of full capacity in 25mins provided the charger has USB fast charge termination

-Charging from a PC’s USB port; from 0 to 80% of full capacity in 60 mins. In this case, the charge current is limited to 100mA

Shelf life:

Holds a charge for at least 6 months in the off state before recharge is required

Replacement:

Battery cannot be replaced

14.4 Materials and Allergies

The headband attachment is made of stainless steel and does not have a nickel-coated surface. Nickel release from the headband is 0.02 μg/cm2/week, which is well below the 0.50 μg/cm2/week limit established by EU Directive 94/27/EF. The stainless steel alloy was tested for nickel release in accordance with the European standard EN 1811:1998.

Other wearing-style attachments are made of plastic and contain no known allergens. The leatherette ear cushions do not contain vinyl.

The products contain no natural rubber, nickel or chrome that can come into contact with users’ skin.

14.5 Jabra GO Base

Dimensions:

160mm x 94mm x 82mm

Operating environment:

-10˚C to +60˚C (when charging: 0˚C to +45˚C); Up to 95% RH non condensing

Power:

7.5V / 650mA (via AC mains adapter)

Touchscreen:

2.4” touch-sensitive TFT; Q-VGA resolution

Touchscreen functions:

Detailed call handling, system configuration and setup wizard; can fetch and redial from mobile-phone call history (incoming, outgoing and missed calls)

Cradle:

Fits supplied Jabra GO headset; features magnetic coupling; recharges the headset battery while headset is docked; easily replaced to accommodate future headset upgrades

Audio:

Built-in speaker can provide ring tones and/or audio feedback for touchscreen operation

Bluetooth® version:

BT 2.1, Class 1

Bluetooth® range:

Up to 100m

Bluetooth® profiles:

Headset profile (HSP 1.1), hands-free profile (HFP 1.5), device-identification profile (DIP 1.3), phone-book access profile (PBAP 1.0)

Bluetooth® pairing table:

1 trusted device (headset)

Jabra GO 6470 User manual

72

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Jabra GO Contents Daily Use Calling, Answering and Hanging Up Jabra GO Touchscreen Base 10.110.2 10.311.1 11.211.4 11.5Jabra GO Headset features Jabra GO Base featuresJabra GO Travel Charger features IntroductionImportant Safety Information Read the Safety guide Protecting your Hearing with SafeToneIntellitone Noise-Exposure Protection Protection level Criteria for selectingCare and Maintenance Other SpecificationsPackage Contents Product OverviewOptional Accessories Jabra GO 6400 series accessoriesJabra GO Headset Diagram Multifunction button answer/end call, among other functionsJabra GO Base Diagram Jabra GO base, seen from the front and back, respectivelySystem Setup and Connections Setup Overview and BackgroundQuick-Start Setup Wizard Apply Power to the Jabra GO BaseAssembling the Jabra GO Base and Headset Assemble the Headset Wearing the Jabra GO headset in various stylesPlace the Headset in its Cradle Connecting the Jabra GO Base to Your Desk Phone Identifying Your Desk Phone FeaturesStandard desk phone Desk phone with headset portConnecting to a Desk Phone without a Headset Port Connecting to a desk phone without a headset portConnecting to a Standard Headset Port Connecting to a Proprietary Headset PortConfiguring the Jabra GO Base for Your Desk Phone Setting the Clear Dial-tone Switch to find a Clear Dial-toneSetting the Microphone Level If the Jabra GO base cannot contact the Jabra test serverUsing a Handset Lifter or Electronic Hookswitch Set microphone levelConnecting to the GN1000 Remote Handset Lifter GN1000GN1000 Connecting to a Phone with an Electronic Hookswitch Connecting to a Load-detect equipped PhoneConnecting to a Phone using RHL Mode Connecting the Jabra GO Base to Your Computer Configuring the base for your softphonePairing Your Headset with a Mobile Phone Installing and Running the Jabra PC Suite Applying Firmware Updates Check for Updates result window in Jabra Control CenterCentral Administration and Mass Deployment Headset Controls and Indicators Headset Visual and Audio IndicatorsDaily Use Calling, Answering and Hanging Up Target Phone ConceptHow to Make a Call Standard Mobile Phone DialingVoice-Activated Mobile Phone Dialing Calling through a SoftphoneHow to answer a call Calling through a Desk PhoneHanging up Do one of the following to answer the callFor all other types of phones Controlling the Speaker Volume and Microphone Switching between Your Phone and HeadsetDesk Phones Last Number Redial Managing Call Collisions and Call WaitingListening to Music Managed from the headsetHow to Wear the Headset Jabra GO HeadsetAssembling or Changing the Wearing Style Attaching the Ear Hook for either EarPairing with Bluetooth wireless technology Devices Pairing the Headset with a Mobile PhoneReplacing the Earbud Attaching the Head- or NeckbandPairing the Headset with a Jabra GO Base Managing Your Bluetooth ConnectionsHeadset Controls and Signals Audio signal tonesHeadset visual indicator Gesture name How to make itFunction Tap Double Press Long Press Headset Signal Tones State or event Tone descriptionChoosing Voice or Tones for Target indicators Headset Visual Indicators LEDHeadset state Battery Indicators and Recharge POwer save modeBattery indicators Recharging the HeadsetHigh capacity Jabra Go Installations Staying within RangeMicrophone Noise Blackout Narrowband vs. Wideband AudioManaging Bluetooth Connections and the Pairing Table Clearing the Bluetooth Pairing TableMaking and changing Connections Mobile phone connection is lost Jabra GO Base Connections and Setup Using the TouchscreenJabra GO Touchscreen Base Status barStandard Operation For MSH Users OnlyCall options menu Call OptionsPhone menu PC & SoftphoneMsh phone active call screen Managing Call CollisionManaging Call Waiting One or more calls on hold call waitingManaging call waiting one or more calls are on hold SettingS Menu SettingsAdvanced settings menu Headset Docking-OperationJabra GO Base Audio Indicators Setup Wizard touch here to run the whole setup wizardTheft Protection Replacing the CradleWeb conferencing ShownAudio-hold and call switching Overview what is possible?Call Switching Audio On-HOLD To displayUsing the Jabra GO Travel Charger Jabra GO Travel Charger DiagramStoring the Headset and USB Bluetooth Adapter Charging the Headset with the Travel Charger Communicating with a PCJabra Link 350 USB Bluetooth Adapter Jabra Link 350 USB Bluetooth Adapter DiagramPurpose of the USB Bluetooth Adapter Jabra Link 350 USB Bluetooth Adapter Setup and ConnectionPairing the Adapter and Headset Slow-flashing green lightConstant blue light Jabra Link 350 USB Bluetooth Adapter Visual Indicators Jabra Link 350 USB Bluetooth Adapter MFBAdapter Status LED Signal Function Tap PressFAQs and Troubleshooting Why doesn’t my computer detect the Jabra GO 6470 base?How do I pair my headset with the Jabra GO 6470 base? Can’t contact the dial-in server. What should I do?Hear myself when I talk using my desk phone. What can I do? What is the range on the Jabra GO 6470? What is the Talk Time of a Jabra GO 6400 HEADSET?Getting Assistance EuropeMiddle East/Africa USA and CanadaTechnical Specifications HeadsetHeadset Hearing Protection Headset Battery Materials and AllergiesJabra GO Base Jabra Link 350 USB Bluetooth Adapter Certifications and Safety Approvals Jabra GO Travel ChargerProduct Disposal GlOSSARY USB Bluetooth adapter Softphone driverWideband audio RevD
Top Page Image Contents