NordicTrack NTL25530 user manual Problem The walking belt slows when walked on, Power Cord

Page 29

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep

the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a. If the walking belt is off-center, first remove the key and

 

UNPLUG THE POWER CORD

 

. If the walking belt has

 

shifted to the left,

use the allen wrench to turn the left

 

rear roller bolt clockwise 1/2 of a turn;

if the walking belt

 

has shifted to the right,

turn the bolt counterclockwise

 

1/2 of a turn. Be careful not to overtighten the walking belt.

 

Plug in the power cord, insert the key, and run the treadmill

 

for a few minutes. Repeat until the walking belt is cen-

 

tered.

 

 

b. If the walking belt slips when walked on, first remove the

key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn.

When the walking belt is correctly tightened, you should

be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and care- fully walk on the treadmill for a few minutes. Repeat until

the walking belt is properly tightened.

a

b

PROBLEM: The treadmill rocks during use

SOLUTION:

a. If the

treadmill r

ocks slightly

during use, turn one or

 

both of the Leveling Feet (127)

under the Upright (99)

until the the rocking motion is eliminated. Note: If nec- essary, tip the treadmill forward and use a phillips screwdriver to turn the Leveling Feet.

a

 

127

 

127

99

 

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Customer HOT Line QUESTIONS?Table of Contents Important Precautions Never insert or drop any object into any opening Before YOU Begin Using the 7200 R treadmillLeft Side Right SideAssembly requires two people AssemblyWire cutters Adjustable Wrench With the help of a second person, carefully raise both83Be. careful not to pinch the wires Connector and try againDo not tighten the Bolts yet Parts are properly tightened before you use the treadmillChest Pulse Sensor Care and Maintenance HOW to PUT on the Chest Pulse SensorChest Pulse Sensor Troubleshooting Self near the center of the walking beltPerformant Lube HOW to Plug in the Power CordThis product must be grounded.If it should malfunc Grounded outlet is not available Grounded Outlet BoxMore information Features of the ConsoleFree Move the on/off circuit breaker to the reset po 2Plug in the power cordEnter your weight To reduce the possibility of electric shockStart the walking belt 2Select the manual modeChange the incline of the treadmill as desired Training Zone displayStand on the foot Rails Distance/LapsAvoid Moving your Turn on the fans if desired2Select the desired preset program HOW to USE Preset ProgramsInsert the key fully into the console Start the programNext segment When the program has ended, remove the keyFollow your progress with the displays Step onto the foot railsPress the Start button or the Speed + button HOW to Create Custom Programs2Select one of the custom programs HOW to USE Custom Programs HOW to USE Heart Rate Programs Each heart rate program is divided into several time Rate settingThis occurs, see BeginningVideocassettes HOW to Connect Your Portable CD PlayerHOW to Connect Your Portable Stereo Phones jack, see instruction B HOW to Connect Your Home StereoHOW to Connect Your Computer Programs HOW to Connect Your VCRRCA When the CD or video program is completed, Next settings of the CD or video programIf you are using your portable CD player See onFollow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteNext settings of the program Buttons on the console will not operate Information MODE/DEMO ModeIf a D ap Pears in the display HOW to Move the Treadmill HOW to Fold the Treadmill for StorageHold the upper end of the treadmill with your right hand HOW to Lower the Treadmill for USEHold the treadmill firmly with both hands, and lower Jury, bend your legs and keep your back straightProblem The power turns off during use TroubleshootingSolution Power cordPower Cord Problem The walking belt slows when walked onProblem The treadmill rocks during use Shifted to the leftBattery from the sensor unit. Insert a new Problem The heart rate monitor does not function properlyTurn it to the closed position Battery Cover Rubber Gasket Console, press one of the Incline buttonsExercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Page Qty Description Key No. Qty 115 Left Cup Holder Ordering Replacement PartsDescription Key No. Qty R0703A NTL25530 Part No R0703A Limited Warranty
Top Page Image Contents