NordicTrack NTL25530 user manual Connector and try again, 83Be. careful not to pinch the wires

Page 7

4. Cut the plastic tie holding the Upright Wire Harness (119)

4

 

 

in the right Upright (99). Have a second person hold the

 

 

 

 

 

 

 

Handrails (83) near the Uprights. Connect the Upright

 

 

 

 

Wire Harness to the wires extending from the Console

 

 

 

 

Base (130). The connectors should slide together

 

 

130

 

easily and snap into place. If they do not, turn one

 

 

119

 

connector and try again.

Then, insert the connectors

 

 

and the Upright Wire Harness into the hole in the right

 

 

 

 

Upright.

 

 

 

 

 

 

Set the Handrails on the Uprights, being careful not to

 

 

 

99

pinch the wires.

 

 

 

 

 

 

 

 

 

83

 

 

5. Insert two Handrail Bolts (104) with Handrail Spacers

 

5

 

 

(106) into the right Upright (99) and the right Handrail

 

 

 

 

 

(83)Be. careful not to pinch the wires.

Make sure

 

 

 

that the Handrail Spacers are flush against the right

 

 

 

 

Upright, with the thick sides facing the center of the

 

 

 

 

treadmill, as shown in the inset drawing. Next, lift the

 

 

99

 

right Handrail (83) slightly and align the Bolts with the

 

 

 

holes in the Handrail. Thread the Bolts into the

 

83

106

Thick

Handrail.

Do not tighten the Bolts yet.

 

 

 

 

 

 

 

 

 

Side

Attach the left Handrail (not shown) in the same way.

 

 

 

 

Then,

tighten all four Handrail Bolts (104).

 

106

104

 

 

 

 

 

 

6. Make sure

that all

parts are properly tightened before you use the treadmill.

Keep the included allen

wrench in

a secure

place. The allen wrench is used to adjust the walking belt (see page 29).

To protect the

floor or carpet from damage, place a mat under the treadmill.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Customer HOT Line QUESTIONS?Table of Contents Important Precautions Never insert or drop any object into any opening Right Side Using the 7200 R treadmillBefore YOU Begin Left SideWith the help of a second person, carefully raise both AssemblyAssembly requires two people Wire cutters Adjustable WrenchParts are properly tightened before you use the treadmill Connector and try again83Be. careful not to pinch the wires Do not tighten the Bolts yetSelf near the center of the walking belt HOW to PUT on the Chest Pulse SensorChest Pulse Sensor Care and Maintenance Chest Pulse Sensor TroubleshootingGrounded outlet is not available Grounded Outlet Box HOW to Plug in the Power CordPerformant Lube This product must be grounded.If it should malfuncFree Features of the ConsoleMore information To reduce the possibility of electric shock 2Plug in the power cordMove the on/off circuit breaker to the reset po Enter your weightTraining Zone display 2Select the manual modeStart the walking belt Change the incline of the treadmill as desiredTurn on the fans if desired Distance/LapsStand on the foot Rails Avoid Moving yourStart the program HOW to USE Preset Programs2Select the desired preset program Insert the key fully into the consoleStep onto the foot rails When the program has ended, remove the keyNext segment Follow your progress with the displays2Select one of the custom programs HOW to Create Custom ProgramsPress the Start button or the Speed + button HOW to USE Custom Programs HOW to USE Heart Rate Programs Beginning Rate settingEach heart rate program is divided into several time This occurs, seeHOW to Connect Your Portable Stereo HOW to Connect Your Portable CD PlayerVideocassettes HOW to Connect Your Computer HOW to Connect Your Home StereoPhones jack, see instruction B RCA HOW to Connect Your VCRPrograms See on Next settings of the CD or video programWhen the CD or video program is completed, If you are using your portable CD playerNext settings of the program HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Pears in the display Information MODE/DEMO ModeButtons on the console will not operate If a D apHOW to Move the Treadmill HOW to Fold the Treadmill for StorageJury, bend your legs and keep your back straight HOW to Lower the Treadmill for USEHold the upper end of the treadmill with your right hand Hold the treadmill firmly with both hands, and lowerPower cord TroubleshootingProblem The power turns off during use SolutionShifted to the left Problem The walking belt slows when walked onPower Cord Problem The treadmill rocks during useConsole, press one of the Incline buttons Problem The heart rate monitor does not function properlyBattery from the sensor unit. Insert a new Turn it to the closed position Battery Cover Rubber GasketExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Page Qty Description Key No. Qty Description Key No. Qty Ordering Replacement Parts115 Left Cup Holder R0703A NTL25530 Part No R0703A Limited Warranty
Top Page Image Contents