NordicTrack NTSY59210 user manual

Page 16

35.Insert a 115mm Pulley (54) into the Leg Lever (4). Route the High Cable (100) under the Pulley. Attach the Pulley inside the Leg Lever with an M10 x 65mm Bolt (88), two M10 Washers (89), two 15mm x 12mm Spacers (62), and an M10 Nylon Locknut (93).

Slide a Cable Ball (78) onto the end of the High Cable (100). Thread the M10 Nut (25) all the way onto the Cable Eye (22). Tighten the Cable Eye into the end of the Cable. Tighten the M10 Nut against the Cable Ball.

Press a 50mm Square Inner Cap (72) into the bottom of the Leg Lever (4).

36.Locate the Butterfly Cable (102). Attach one end of the Cable to the Left Butterfly Arm (6) with an M10 x 40mm Bolt (83), a 15mm x 12mm Spacer (62), an M10 Washer (89), and an M10 Nylon Locknut (93). Make sure the Spacer is inside the loop in the Cable.

37.Wrap the Butterfly Cable (102) around a 115mm Pulley (54). Attach the Pulley and a Cable Trap

(52)to the indicated bracket on the Press Base

(1)with an M10 x 45mm Bolt (86) and an M10 Nylon Locknut (93). Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

38.Wrap the Butterfly Cable (102) around a 115mm Pulley (54). Attach the Pulley to the bottom of the Double “U”-bracket (36) with an M10 x 45mm Bolt (86) and an M10 Nylon Locknut (93).

35

 

 

 

 

4

 

 

89

62

 

 

93

 

 

 

100

 

 

 

78

 

62

 

 

 

 

88

25

72

89

 

22

 

54

 

36

 

 

 

 

93

 

 

6

 

89

 

62

83

 

 

102

37

 

 

 

 

 

 

52

 

 

 

86

 

 

93 54

 

 

1

 

 

102

 

38

 

 

 

 

36

86

 

 

 

 

 

93

 

 

 

 

54

 

 

 

102

 

16

Image 16
Contents Model No. NTSY59210 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions DecalBefore YOU Begin Assembly Make Assembly Easier for YourselfFrame Assembly Do not tighten the M10 Nylon Locknuts 93 yet Locknuts yet Tighten the M10 Nylon Locknuts 93 used in steps Arm Assembly Page Cable Assembly Page Page Page Page Page Page Seat Assembly Bracket will be closer to the rear edge of the Seat Page Adjusting the Press ARM AdjustmentsChanging the Weight Setting Adjusting the Seat Adjusting the BackrestWeight Resistance Chart Weight Press Butterfly LEG High LOW Plates ARM Lever PulleyTroubleshooting and Maintenance Tightening the CablesCable Diagrams Press Cable Cable Identification ChartHigh Cable Butterfly CableRear Cable Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Exercise Weight Sets Reps DateAerobic Exercise Thursday Aerobic Exercise DateMonday Part Identification CHART-Model No. NTSY59210 R0303APage 50mm Square Inner Cap Part LIST-Model No. NTSY59210 Qty DescriptionExploded Ordering Replacement Parts Limited Warranty