NordicTrack NTSY59210 user manual Locknuts yet

Page 8

7. Press a 26mm x 76mm Inner Cap (74) into the	7
top of the Left Upright (20).	7
top of the Left Upright (20).
Attach the Left Upright (20) to the Rear Base (2)				74
Attach the Left Upright (20) to the Rear Base (2)
with the four M10 x 67mm Bolts (87) and four
M10 Nylon Locknuts (93). Do not tighten the
Locknuts yet.
				20
		93		93
		93
		2
			87	87
8. Press two Weight Guide Bushings (57) into the	8
Rear Base (2).	8
Rear Base (2).	27
	27
Set the two Weight Guides (27) in the indicated
holes in the Rear Base (2).
Slide two M8 x 90mm Bolts (90) through two M8
Large Washers (53), two 15mm x 30mm Spacers
(23), the Rear Base (2), the Weight Guides (27),
and two more 15mm x 30mm Spacers.
				90
	23	23	53
	57	23	53
	57
	23	2

8

Image 8

Contents Customer HOT Line QUESTIONS?Model No. NTSY59210 Serial No Table of Contents Important Precautions DecalBefore YOU Begin Assembly Make Assembly Easier for YourselfFrame Assembly Do not tighten the M10 Nylon Locknuts 93 yet Locknuts yet Tighten the M10 Nylon Locknuts 93 used in steps Arm Assembly Page Cable Assembly Page Page Page Page Page Page Seat Assembly Bracket will be closer to the rear edge of the Seat Page Changing the Weight Setting AdjustmentsAdjusting the Press ARM Adjusting the Seat Adjusting the BackrestWeight Resistance Chart Weight Press Butterfly LEG High LOW Plates ARM Lever PulleyTroubleshooting and Maintenance Tightening the CablesCable Diagrams Press Cable Cable Identification ChartHigh Cable Butterfly CableRear Cable Exercise Guidelines Staying Motivated Muscle ChartCooling Down Exercise Weight Sets Reps DateAerobic Exercise Thursday Aerobic Exercise DateMonday Part Identification CHART-Model No. NTSY59210 R0303APage 50mm Square Inner Cap Part LIST-Model No. NTSY59210 Qty DescriptionExploded Ordering Replacement Parts Limited Warranty