Cateye EC-C400 instruction manual 9QUICK Start, Select the Quick start program

Page 40

9QUICK START

1	Select the Quick start program.
	• Attach the earlobe sensor, and press the QUICK training selection

button to start the Quick start training program.

• A buzzer sounds, and start the training.

Reference: In the Quick start training program, no conditions are specified. The upper pulse limit is fixed to 160 bpm.

Start the warm-up.

•"START WARM-UP" appears in the display. Start pedaling slowly.

•The pedal resistance automatically changes so that it becomes 1.0

kg·m within three minutes of the start of warm-up.

Reference: When the START button is pressed during warm-up, or when the pedal resistance is changed to 1.0 kg·m or more using the or button, the warm-up is skip- ped.

•The pedal resistance (torque) is indicated in the lower part of the graph on the display. One dot along the horizontal axis represents three seconds while two dots along the vertical axis represent 0.1 kg·m.

•The blinking numeric value in the upper part of the graph indicates the pulse at that point. One dot along the vertical axis represents 2 bpm.

•Every three seconds, a row of dots blinks. Thus, the training status can be monitored.

Selecting training program

CONSTANT	H I L L	INTERVAL	QUICK
WATTAGE

MODESTART


2	Continue the training.
2	• When the warm-up period finishes, change the pedal resistance as
	desired using the				and				buttons and then proceed with the train-
	ing program.
	• Pressing the MODE		button switches the numeric value displayed.
	Caution:	If your pulse rate exceeds the upper limit, "STOP EX-
		ERCISE" blinks in the display, training finishes forc-
		ibly, and the pedal resistance drops to the minimum.
	Reference:	• If the pedal cadence is not detected for five seconds,
		the pause display appears. At this time, the speci-
		fied training duration is interrupted and "PAUSE"
		blinks in the display. When pedaling starts again,
		the specified training duration recommences.

•A maximum of 10-minutes' worth of data can be dis played. After 10 minutes, 5-minutes' worth of exe- rcise graph scrolls to the left.

Changing the display

CONSTANT	H I L L	INTERVAL	QUICK
WATTAGE
		MODE	START

40

Image 40

Contents UPRIGHTEC-C4OOBIKE HOW to USE this Manual ContentsIntroduction Part Names Main body Control unitLCD Start Guide Starting with Assembly Attach the front leg Attach the rear legMount the handlebar post Mount the saddleInstall the control unit Attach the pedals2HOW to Adjust Each Part Adjust the saddle heightAdjust the handlebar height Adjust the handlebar angleAdjust the saddle angle Adapting the Pulse Sensor Connect the pulse sensorHandling of sensor cable Use pulse earlobe sensor during exerciseTurn on power and attach earlobe sensor Trying OUT the EC-C400FOR the First TimeInsert the start card the red card provided Check the screen displayPress the Start button to start LCDBring up the calories display by pressing Mode button Finish your training6 Kinds of Programs Fitness Test physical fitness testHR control training training at a constant pulse rate Hill training training by cycling up mountainsInterval training exercise + relief periods Quick start training at any desired pedal resistanceTurn on the power supply Using the EC-C400WITHOUT a Data CardSelect a training program Input training conditions Start your exercise Finish your exerciseCheck your exercise record by scrolling the screen Operation Guide Page 1TRAINING Goals Training goalsMaximum Heart Rate Difference between heart rate and pulse ratePulse Limit Target Pulse Rate2YOUR Strength Level and Training Index HR control trainingConstant wattage control training Hill trainingInterval training Quick start training3FITNESS Test Select the Fitness test programInput the conditions Start the programFinish the Fitness test Test result display and cool downEnd the program 4FITNESS Test Physical Fitness Level PFLMaximum Oxygen Uptake MOU Maximum Physical Work Capacity PWC maxTest Protocol Male≥Select the HR control training program 5HR Control TrainingStart the warm-up Continue the training, maintaining the target pulse Finish your exercise6CONSTANT Wattage Control Training Select the Constant wattage control training programContinue the training, maintaining the wattage Ibly, and the pedal resistance drops to the minimum7HILL Training Select the Hill training programInput training conditions Start the trainingContinue the training 8INTERVAL Training Select the Interval training programContinue the training by repeating exercise and rest 9QUICK Start Select the Quick start programCool-down display or the end display 10HOW to Make a Data Card Specify programSpecify age Specify exercise timeSpecify training target Sample data cardsReference Guide Page Use the wireless chest-belt heart rate sensor CHEST-BELT Heart Rate SensorFunction of the chest-belt heart rate sensor Before putting on the chest-belt heart rate sensorReplace the battery Replace the electrode beltOther Useful Functions Change the units of weightChange the units of resistance of pedaling Troubleshooting TroubleshootingDaily Maintenance Repair Service WARRANTY/ADDITIONAL Parts About the repair service warrantyAccessories/Consumable Parts Additional PartsProduct Specifications 066660051 E