Healthrider WESY8630C3 manual Right Arm 5. Be sure that the upper, Only once, Order new Retainers

ARM ASSEMBLY

15. Attach a Press Arm (7) to one side of the			15
Press Frame (12) with two 5/16” x 2 1/2” Bolts
(39) and two 5/16” Nylon Locknuts (40).
Attach the other Press Arm (7) to the Press				39	7
Frame (12) in the same manner.
			7		40
			12
16. Press a 1” Round Inner Cap (70) into one of			16
the Press Arms (7). Press a 1 3/4” Square				48
Inner Cap (48) into the Press Arm.
Repeat this step for the other Press Arm (not					70
shown).
					7
17. Lubricate both axles on the Butterfly Frame			17
(3).
Refer to the drawing and identify the Right Fly
Arm (5) and the Left Fly Arm (6).				3
Press a 1 3/4” Square Inner Cap (48) into the					Lubricate Axle
upper end of the Left Arm (6). Slide the Left
Fly Arm onto the indicated axle.		Note: Be
careful not to confuse the Left Arm with			5	48
the Right Arm (5). Be sure that the upper
					45
end of the Left Arm is behind the indicated			Bracket
bracket on the Butterfly Frame (3).
					46
IMPORTANT NOTE: Before assembling the					6
1” Retainers (45) used in this step, be sure
that you thoroughly understand the step.
The Retainers can be assembled		only once.
If they must be removed, you will need to
order new Retainers.
Tap two 1” Retainers (45) and a 1” Round
Outer Cap (46) onto the axle.	Be sure that
the teeth on the Retainers bend toward the					Axle
Round Outer Cap, as shown in the inset
					45
drawing.
Attach the Right Fly Arm (5) in the same man-					46
ner.

10