Healthrider WESY8630C3 Be sure that Large Cable Trap is turned to hold, Pulley move smoothly

CABLE ASSEMBLY

36. Route the Press Cable (88) over the indicated			36
3 1/2” Pulley (82) attached to the Press
				88
Frame (12).	Be sure that the Cable Trap
(80) is turned to hold the Cable in place
and that the Cable is between the Pulley
and the crossbar on the Press Frame.
Tighten the 3/8” Nylon Locknut (42) and the				82
3/8” x 3 1/2” Bolt (not shown).
				80
				42
				12
				Crossbar
37. Wrap the Press Cable (88) around a “V”			37
Pulley (81). Attach the “V” Pulley to the lower
bracket on the Leg Press Upright (4) with a
3/8” x 2 1/4” Bolt (97) and a 3/8” Nylon Jam
Nut (43).
				4
				81
				88
				43
				97
38. Wrap the Press Cable (88) around a 3 1/2”			38
Pulley (82). Attach the Pulley and a Cable
Trap (80) to the Leg Press Arm (9) with the
3/8” x 5” Bolt (74).
Slide another 3 1/2” Pulley (82) with a Cable				82	42
Trap (80) onto the 3/8” x 5” Bolt (74). Hand
tighten a 3/8” Nylon Locknut (42) onto the					80
Bolt. Do not tighten the Nylon Locknut
until step 40.				9
				88
			74	82
				80
39. Wrap the Press Cable (88) around a “V”			39
Pulley (81). Attach the “V” Pulley and a Large
				83
Cable Trap (83) to the bracket on the Front
				65
Seat Frame (8) with a 3/8” x 2 1/2” Bolt (65)
and a 3/8” Nylon Locknut (42).		Be sure that
the Large Cable Trap is turned to hold the				81
Cable in place and that the Cable and
Pulley move smoothly.
					8
				88
				42

16