1.Start the software.
2.Activate the transfer function of the software and follow the directions on screen.
3.If the receiver is in the Time of Day display scroll up or down until CONNECT is displayed.
4.Place the receiver less than 4"/ 10 cm from the loudspeaker. Do not move the receiver during the data transfer.
5.The receiver automatically starts to transfer the information.
UpLink and COM appear. You will hear a chirping sound while information is transferred to the receiver. All settings are transferred completely to the receiver when 100 % is displayed. Press and hold the stop button to return to the Time of Day display after data transfer.
If the data transfer was unsuccessful bring the receiver closer to the loudspeakers or turn the volume level of the loudspeakers up.
You may interrupt the data transfer from the computer by pressing the stop button during data transfer. CONNECT is displayed.
E 62