Setting Tips
Swap Time 1 or Time 2
In the Time of Day display press and hold the down button. Time 1 or Time 2 is displayed in the uppermost row for a few of seconds. Displayed time will now be used in all watch and alarm functions. If you chose time 2, “2” is displayed in the Time of Day display.
Shortcut to Watch Setting Loop
Press and hold the signal/light button for a few of seconds to enter into the watch setting loop. If you want to skip some parts and go directly to a watch function, scroll up or down button until the desired watch function is displayed. Set the function as in the “Watch settings” section.
Swap Measuring Units
As you set your user information on weight and height. Press and hold the signal/light button until the units are swapped. Release the button.
Swap Date and User ID Number with Polar S410
You are able to set a user ID by Polar Precision Performance software. When set, the user ID number is shown on the upper row of the Time of Day display. You can swap the user ID and date by pressing and holding the up button.
B 34