Smooth Fitness CE-8.0LC owner manual Console Bracket Assembly, Console Fixed Bracket Assembly

Page 9

“ASSEMBLY INSTRUCTIONS”

STEP 10 – Console Bracket

Assembly

CAUTION: Be careful not to

damage the Middle Pulse Sensor Wire

(112) while assembling STEP 9.

Slide the Console Bracket (18) onto the

Upright Post (4) as the FIG1 illustration

shows on the top right corner.

STEP 11– Console Fixed Bracket Assembly

NOTE: For shipping purpose, the 4 x Button Head Bolts (M8xp1.25x12mm) (87) and 4 x Lock Washers (M8)(66) are attached on the Upright Post (4).

a.Remove the 4 x Button Head Bolts (M8xp1.25x12mm)(87) and 4 x Lock Washers (M8)(66) from the Upright Post

(4).

b.Attach the Console Fixed Bracket (43) onto the Upright Post (4) and secure with the 4 x Button Head Bolts (M8xp1.25x12mm)(87) and 4 x Lock Washers (M8)(66)

STEP 12 – Stationary Handlebar & Wire Assembly

NOTE: For shipping purpose, the Button Head Bolts (M8xp1.25x16mm)(88) and Lock Washers (M8)(66) are attached on the Stationary Handlebar (5).

a.Remove the 4 x Button Head Bolts (M8xp1.25x16mm)(88) and 4 x Lock Washers (M8)(66) from the Stationary

Handlebar (5).

b.Connect the Middle Pulse Sensor Wire (112) and the Lower Pulse Sensor Wire (113) to the Stationary

Handlebar (5).

NOTE: After connecting the wires’ pins, slightly and gently pull two sides of wires to test and make sure whether the wires are fully connected.

c.Insert the Stationary Handlebar (5) into the Upright Post (4) and secure with the 4 x Button Head Bolts (M8xp1.25x16mm)(88) and 4 x Lock Washers (M8)(66).

9

Image 9

Contents Version IHP OWNER’S ManualSafety Instructions ’TY Part No. and DescriptionBefore YOU Begin Following Tools are Included for AssemblyLeveler Assembly Assembly InstructionsStabilizer Assembly Stabilizer Upright Post Assembly Upright Sleeve Assembly Wire Assembly Slide the Upright Sleeve 22 onto the Upright PostRight Pedal Support Arm 11 onto the Right Pivoting Arm Pedal Support Arm & Pivoting Arm AssemblySocket Wrench Front Decorative Upright CoverPedal Assembly Console Fixed Bracket Assembly Console Bracket AssemblyStationary Handlebar & Wire Assembly Damage the Middle Pulse Sensor WireAccessory Tray Assembly Console & Console Bracket AssemblyUpper Handlebar Assembly Action Arm Cover AssemblyLeft Operation Instructions Power SupplyComputer Operation Power Off Power onProgram List SpeakerTo Power on status Console ButtonsTarget H.R. and Level in each time interval Speaker Sound System Console Functions Gender WeightAGE HeightPower on status Press any button on the console to turn on the consoleEnter Manual Program SET Your Gender SET Your WeightSET Your AGE SET Your HeightChanging the Resistance Setting SET the TimeStart to Exercise Console Instructions Program P2 ~ P10 Enter the Preset ProgramsSET Your Height Start to Exercise Page P11 User P12 User Console Instructions Program P11 ~SET Your AGE Programming the 2 User programs Enter P13 Program P13Console Instructions -H.R.C. Program P13 SET Your Personal WeightSET Your Personal Height SET the Desired TimeSET the Target Heart Rate Start ExerciseMUST-KNOWN Heart Rate Program Info Console Instructions -H.R.C. Interval Program P14 Normal way to operate Program P14Enter P14 SET Your AGE High Target Heart Rate 70 ~ 180 BPM Beats PER Minute 1 BPM SET the High Target Heart RateSET the LOW Target Heart Rate Minute 1 BPM INCREMENT. Note LOW Target Heart RateHeart Rate Muscle Chart Stretching Routine Before completing an exercise session, always Read carefully the following before using your bikeProduct Parts Drawing Item Name Qty Part ListPart List CE8.0LCi Canada CE8.0LCi U.S.A. Only888.800.1167

Related manuals

Manual 37 pages 62.05 Kb